Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-204617 | RHEL-07-040660 | SV-204617r880821_rule | Medium |
Description |
---|
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology. |
STIG | Date |
---|---|
Red Hat Enterprise Linux 7 Security Technical Implementation Guide | 2023-06-02 |
Check Text ( C-4741r880819_chk ) |
---|
Verify the system does not send IPv4 ICMP redirect messages. # grep -r net.ipv4.conf.all.send_redirects /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null If "net.ipv4.conf.all.send_redirects" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out or does not have a value of "0", this is a finding. Check that the operating system implements the "all send_redirects" variables with the following command: # /sbin/sysctl -a | grep net.ipv4.conf.all.send_redirects net.ipv4.conf.all.send_redirects = 0 If the returned line does not have a value of "0", this is a finding. If conflicting results are returned, this is a finding. |
Fix Text (F-4741r880820_fix) |
---|
Configure the system to not allow interfaces to perform IPv4 ICMP redirects. Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.all.send_redirects = 0 Issue the following command to make the changes take effect: # sysctl --system |