The Red Hat Enterprise Linux operating system must use a reverse-path filter for IPv4 network traffic when possible on all interfaces.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-204610	RHEL-07-040611	SV-204610r880800_rule		Medium

Description
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems that are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2022-12-06

Details

Check Text ( C-4734r880798_chk )
Verify the system uses a reverse-path filter for IPv4: # grep -r net.ipv4.conf.all.rp_filter /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null net.ipv4.conf.all.rp_filter = 1 If "net.ipv4.conf.all.rp_filter" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out, or does not have a value of "1", this is a finding. Check that the operating system implements the accept source route variable with the following command: # /sbin/sysctl -a \| grep net.ipv4.conf.all.rp_filter net.ipv4.conf.all.rp_filter = 1 If the returned line does not have a value of "1", this is a finding. If conflicting results are returned, this is a finding.

Check Text ( C-4734r880798_chk )

Verify the system uses a reverse-path filter for IPv4:

# grep -r net.ipv4.conf.all.rp_filter /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null
net.ipv4.conf.all.rp_filter = 1

If "net.ipv4.conf.all.rp_filter" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out, or does not have a value of "1", this is a finding.

Check that the operating system implements the accept source route variable with the following command:

# /sbin/sysctl -a | grep net.ipv4.conf.all.rp_filter
net.ipv4.conf.all.rp_filter = 1

If the returned line does not have a value of "1", this is a finding.

If conflicting results are returned, this is a finding.

Fix Text (F-4734r880799_fix)
Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.all.rp_filter = 1 Issue the following command to make the changes take effect: # sysctl --system