The Red Hat Enterprise Linux operating system must implement NIST FIPS-validated cryptography for the following: to provision digital signatures, to generate cryptographic hashes, and to protect data requiring data-at-rest protections in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-204497	RHEL-07-021350	SV-204497r877398_rule		High

Description
Use of weak or untested encryption algorithms undermines the purposes of using encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000185-GPOS-00079, SRG-OS-000396-GPOS-00176, SRG-OS-000405-GPOS-00184, SRG-OS-000478-GPOS-00223

Description

Use of weak or untested encryption algorithms undermines the purposes of using encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000185-GPOS-00079, SRG-OS-000396-GPOS-00176, SRG-OS-000405-GPOS-00184, SRG-OS-000478-GPOS-00223

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2022-12-06

Details

Check Text ( C-36347r602639_chk )
Verify the operating system implements DoD-approved encryption to protect the confidentiality of remote access sessions. Check to see if the "dracut-fips" package is installed with the following command: # yum list installed dracut-fips dracut-fips-033-360.el7_2.x86_64.rpm If a "dracut-fips" package is installed, check to see if the kernel command line is configured to use FIPS mode with the following command: Note: GRUB 2 reads its configuration from the "/boot/grub2/grub.cfg" file on traditional BIOS-based machines and from the "/boot/efi/EFI/redhat/grub.cfg" file on UEFI machines. # grep fips /boot/grub2/grub.cfg /vmlinuz-3.8.0-0.40.el7.x86_64 root=/dev/mapper/rhel-root ro rd.md=0 rd.dm=0 rd.lvm.lv=rhel/swap crashkernel=auto rd.luks=0 vconsole.keymap=us rd.lvm.lv=rhel/root rhgb fips=1 quiet If the kernel command line is configured to use FIPS mode, check to see if the system is in FIPS mode with the following command: # cat /proc/sys/crypto/fips_enabled 1 If a "dracut-fips" package is not installed, the kernel command line does not have a fips entry, or the system has a value of "0" for "fips_enabled" in "/proc/sys/crypto", this is a finding. Verify the file /etc/system-fips exists. # ls -l /etc/system-fips If this file does not exist, this is a finding.

Check Text ( C-36347r602639_chk )

Verify the operating system implements DoD-approved encryption to protect the confidentiality of remote access sessions.

Check to see if the "dracut-fips" package is installed with the following command:

# yum list installed dracut-fips

dracut-fips-033-360.el7_2.x86_64.rpm

If a "dracut-fips" package is installed, check to see if the kernel command line is configured to use FIPS mode with the following command:

Note: GRUB 2 reads its configuration from the "/boot/grub2/grub.cfg" file on traditional BIOS-based machines and from the "/boot/efi/EFI/redhat/grub.cfg" file on UEFI machines.

# grep fips /boot/grub2/grub.cfg
/vmlinuz-3.8.0-0.40.el7.x86_64 root=/dev/mapper/rhel-root ro rd.md=0 rd.dm=0 rd.lvm.lv=rhel/swap crashkernel=auto rd.luks=0 vconsole.keymap=us rd.lvm.lv=rhel/root rhgb fips=1 quiet

If the kernel command line is configured to use FIPS mode, check to see if the system is in FIPS mode with the following command:

# cat /proc/sys/crypto/fips_enabled
1

If a "dracut-fips" package is not installed, the kernel command line does not have a fips entry, or the system has a value of "0" for "fips_enabled" in "/proc/sys/crypto", this is a finding.

Verify the file /etc/system-fips exists.

# ls -l /etc/system-fips

If this file does not exist, this is a finding.

Fix Text (F-36310r602640_fix)
Configure the operating system to implement DoD-approved encryption by installing the dracut-fips package. To enable strict FIPS compliance, the fips=1 kernel option needs to be added to the kernel command line during system installation so key generation is done with FIPS-approved algorithms and continuous monitoring tests in place. Configure the operating system to implement DoD-approved encryption by following the steps below: The fips=1 kernel option needs to be added to the kernel command line during system installation so that key generation is done with FIPS-approved algorithms and continuous monitoring tests in place. Users should also ensure that the system has plenty of entropy during the installation process by moving the mouse around, or if no mouse is available, ensuring that many keystrokes are typed. The recommended amount of keystrokes is 256 and more. Less than 256 keystrokes may generate a non-unique key. Install the dracut-fips package with the following command: # yum install dracut-fips Recreate the "initramfs" file with the following command: Note: This command will overwrite the existing "initramfs" file. # dracut -f Modify the kernel command line of the current kernel in the "grub.cfg" file by adding the following option to the GRUB_CMDLINE_LINUX key in the "/etc/default/grub" file and then rebuild the "grub.cfg" file: fips=1 Changes to "/etc/default/grub" require rebuilding the "grub.cfg" file as follows: On BIOS-based machines, use the following command: # grub2-mkconfig -o /boot/grub2/grub.cfg On UEFI-based machines, use the following command: # grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg If /boot or /boot/efi reside on separate partitions, the kernel parameter boot= must be added to the kernel command line. You can identify a partition by running the df /boot or df /boot/efi command: # df /boot Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 495844 53780 416464 12% /boot To ensure the "boot=" configuration option will work even if device naming changes occur between boots, identify the universally unique identifier (UUID) of the partition with the following command: # blkid /dev/sda1 /dev/sda1: UUID="05c000f1-a213-759e-c7a2-f11b7424c797" TYPE="ext4" For the example above, append the following string to the kernel command line: boot=UUID=05c000f1-a213-759e-c7a2-f11b7424c797 If the file /etc/system-fips does not exists, recreate it: # touch /etc/ system-fips Reboot the system for the changes to take effect.

Fix Text (F-36310r602640_fix)

Configure the operating system to implement DoD-approved encryption by installing the dracut-fips package.

To enable strict FIPS compliance, the fips=1 kernel option needs to be added to the kernel command line during system installation so key generation is done with FIPS-approved algorithms and continuous monitoring tests in place.

Configure the operating system to implement DoD-approved encryption by following the steps below:

The fips=1 kernel option needs to be added to the kernel command line during system installation so that key generation is done with FIPS-approved algorithms and continuous monitoring tests in place. Users should also ensure that the system has plenty of entropy during the installation process by moving the mouse around, or if no mouse is available, ensuring that many keystrokes are typed. The recommended amount of keystrokes is 256 and more. Less than 256 keystrokes may generate a non-unique key.

Install the dracut-fips package with the following command:

# yum install dracut-fips

Recreate the "initramfs" file with the following command:

Note: This command will overwrite the existing "initramfs" file.

# dracut -f

Modify the kernel command line of the current kernel in the "grub.cfg" file by adding the following option to the GRUB_CMDLINE_LINUX key in the "/etc/default/grub" file and then rebuild the "grub.cfg" file:

fips=1

Changes to "/etc/default/grub" require rebuilding the "grub.cfg" file as follows:

On BIOS-based machines, use the following command:

# grub2-mkconfig -o /boot/grub2/grub.cfg

On UEFI-based machines, use the following command:

# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg

If /boot or /boot/efi reside on separate partitions, the kernel parameter boot= must be added to the kernel command line. You can identify a partition by running the df /boot or df /boot/efi command:

# df /boot
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 495844 53780 416464 12% /boot

To ensure the "boot=" configuration option will work even if device naming changes occur between boots, identify the universally unique identifier (UUID) of the partition with the following command:

# blkid /dev/sda1
/dev/sda1: UUID="05c000f1-a213-759e-c7a2-f11b7424c797" TYPE="ext4"

For the example above, append the following string to the kernel command line:

boot=UUID=05c000f1-a213-759e-c7a2-f11b7424c797

If the file /etc/system-fips does not exists, recreate it:

# touch /etc/ system-fips

Reboot the system for the changes to take effect.