UCF STIG Viewer Logo

The Red Hat Enterprise Linux operating system must be configured so that the Datagram Congestion Control Protocol (DCCP) kernel module is disabled unless required.


Overview

Finding ID Version Rule ID IA Controls Severity
V-204450 RHEL-07-020101 SV-204450r853892_rule Medium
Description
Disabling DCCP protects the system against exploitation of any flaws in the protocol implementation.
STIG Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide 2022-09-12

Details

Check Text ( C-4574r88542_chk )
Verify the operating system disables the ability to load the DCCP kernel module.

# grep -r dccp /etc/modprobe.d/* | grep -i "/bin/true" | grep -v "^#"

install dccp /bin/true

If the command does not return any output, or the line is commented out, and use of DCCP is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Verify the operating system disables the ability to use the DCCP kernel module.

Check to see if the DCCP kernel module is disabled with the following command:

# grep -i dccp /etc/modprobe.d/* | grep -i "blacklist" | grep -v "^#"

blacklist dccp

If the command does not return any output or the output is not "blacklist dccp", and use of the dccp kernel module is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.
Fix Text (F-4574r88543_fix)
Configure the operating system to disable the ability to use the DCCP kernel module.

Create a file under "/etc/modprobe.d" with the following command:

# touch /etc/modprobe.d/dccp.conf

Add the following line to the created file:

install dccp /bin/true

Ensure that the DCCP module is blacklisted:

# vi /etc/modprobe.d/blacklist.conf

Add or update the line:

blacklist dccp