The Red Hat Enterprise Linux operating system must not forward IPv6 source-routed packets.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-204630	RHEL-07-040830	SV-204630r603261_rule		Medium

Description
Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2021-03-01

Details

Check Text ( C-4754r89082_chk )
If IPv6 is not enabled, the key will not exist, and this is Not Applicable. Verify the system does not accept IPv6 source-routed packets. # grep net.ipv6.conf.all.accept_source_route /etc/sysctl.conf /etc/sysctl.d/* net.ipv6.conf.all.accept_source_route = 0 If "net.ipv6.conf.all.accept_source_route" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding. Check that the operating system implements the accept source route variable with the following command: # /sbin/sysctl -a \| grep net.ipv6.conf.all.accept_source_route net.ipv6.conf.all.accept_source_route = 0 If the returned lines do not have a value of "0", this is a finding.

Check Text ( C-4754r89082_chk )

If IPv6 is not enabled, the key will not exist, and this is Not Applicable.

Verify the system does not accept IPv6 source-routed packets.

# grep net.ipv6.conf.all.accept_source_route /etc/sysctl.conf /etc/sysctl.d/*

net.ipv6.conf.all.accept_source_route = 0

If "net.ipv6.conf.all.accept_source_route" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding.

Check that the operating system implements the accept source route variable with the following command:

# /sbin/sysctl -a | grep net.ipv6.conf.all.accept_source_route
net.ipv6.conf.all.accept_source_route = 0

If the returned lines do not have a value of "0", this is a finding.

Fix Text (F-4754r89083_fix)
Set the system to the required kernel parameter, if IPv6 is enabled, by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv6.conf.all.accept_source_route = 0 Issue the following command to make the changes take effect: # sysctl --system