The Red Hat Enterprise Linux operating system must be configured so that all network connections associated with SSH traffic are terminated at the end of the session or after 10 minutes of inactivity, except to fulfill documented and validated mission requirements.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-204587	RHEL-07-040320	SV-204587r603261_rule		Medium

Description
Terminating an idle SSH session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle SSH session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that the operating system terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109

Description

Terminating an idle SSH session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle SSH session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that the operating system terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2020-12-08

Details

Check Text ( C-4711r88953_chk )
Verify the operating system automatically terminates a user session after inactivity time-outs have expired. Check for the value of the "ClientAliveInterval" keyword with the following command: # grep -iw clientaliveinterval /etc/ssh/sshd_config ClientAliveInterval 600 If "ClientAliveInterval" is not configured, commented out, or has a value of "0", this is a finding. If "ClientAliveInterval" has a value that is greater than "600" and is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Check Text ( C-4711r88953_chk )

Verify the operating system automatically terminates a user session after inactivity time-outs have expired.

Check for the value of the "ClientAliveInterval" keyword with the following command:

# grep -iw clientaliveinterval /etc/ssh/sshd_config

ClientAliveInterval 600

If "ClientAliveInterval" is not configured, commented out, or has a value of "0", this is a finding.

If "ClientAliveInterval" has a value that is greater than "600" and is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Fix Text (F-4711r88954_fix)
Configure the operating system to automatically terminate a user session after inactivity time-outs have expired or at shutdown. Add the following line (or modify the line to have the required value) to the "/etc/ssh/sshd_config" file (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor): ClientAliveInterval 600 The SSH service must be restarted for changes to take effect.

Fix Text (F-4711r88954_fix)

Configure the operating system to automatically terminate a user session after inactivity time-outs have expired or at shutdown.

Add the following line (or modify the line to have the required value) to the "/etc/ssh/sshd_config" file (this file may be named differently or be in a different location if using a version of SSH that is provided by a third-party vendor):

ClientAliveInterval 600

The SSH service must be restarted for changes to take effect.