Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must not allow interfaces to perform Internet Protocol version 4 (IPv4) Internet Control Message Protocol (ICMP) redirects by default.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-72291 | RHEL-07-040650 | SV-86915r3_rule | Medium |
| Description |
|---|
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 7 Security Technical Implementation Guide | 2017-12-14 |
Details
| Check Text ( C-72525r3_chk ) |
|---|
| Verify the system does not allow interfaces to perform IPv4 ICMP redirects by default. Check the value of the "default send_redirects" variables with the following command: # /sbin/sysctl -a | grep 'net.ipv4.conf.default.send_redirects' net.ipv4.conf.default.send_redirects = 0 If the returned line does not have a value of "0", or a line is not returned, this is a finding. |
| Fix Text (F-78645r3_fix) |
|---|
| Configure the system to not allow interfaces to perform IPv4 ICMP redirects by default. Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" (or modify the line to have the required value): net.ipv4.conf.default.send_redirects=0 Issue the following command to make the changes take effect: # sysctl -p /etc/sysctl.conf |