The audit system must take appropriate action when the audit storage volume is full.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-72087	RHEL-07-030320	SV-86711r2_rule		Medium

Description
Taking appropriate action in case of a filled audit storage volume will minimize the possibility of losing audit records.

STIG	Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide	2017-12-14

Details

Check Text ( C-72319r3_chk )

Verify the action the operating system takes if the disk the audit records are written to becomes full. To determine the action that takes place if the disk is full on the remote server, use the following command: # grep -i disk_full_action /etc/audisp/audisp-remote.conf disk_full_action = single To determine the action that takes place if the network connection fails, use the following command: # grep -i network_failure_action /etc/audisp/audisp-remote.conf network_failure_action = stop If the value of the "network_failure_action" option is not "syslog", "single", or "halt", or the line is commented out, this is a finding. If the value of the "disk_full_action" option is not "syslog", "single", or "halt", or the line is commented out, this is a finding.

Fix Text (F-78439r3_fix)

Configure the action the operating system takes if the disk the audit records are written to becomes full. Uncomment or edit the "disk_full_action" option in "/etc/audisp/audisp-remote.conf" and set it to "syslog", "single", or "halt", such as the following line: disk_full_action = single Uncomment the "network_failure_action" option in "/etc/audisp/audisp-remote.conf" and set it to "syslog", "single", or "halt".