UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

Wireless network adapters must be disabled.


Overview

Finding ID Version Rule ID IA Controls Severity
V-73177 RHEL-07-041010 SV-87829r1_rule Medium
Description
The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.
STIG Date
Red Hat Enterprise Linux 7 Security Technical Implementation Guide 2017-07-08

Details

Check Text ( C-73301r1_chk )
Verify that there are no wireless interfaces configured on the system.

This is N/A for systems that do not have wireless network adapters.

Check for the presence of active wireless interfaces with the following command:

# nmcli device
DEVICE TYPE STATE
eth0 ethernet connected
wlp3s0 wifi disconnected
lo loopback unmanaged

If a wireless interface is configured and its use on the system is not documented with the Information System Security Officer (ISSO), this is a finding.
Fix Text (F-79623r1_fix)
Configure the system to disable all wireless network interfaces with the following command:

#nmcli radio wifi off