Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
IP forwarding for IPv4 must not be enabled, unless the system is a router.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-217913 | RHEL-06-000082 | SV-217913r505923_rule | Medium |
| Description |
|---|
| IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2020-09-03 |
Details
| Check Text ( C-19394r376754_chk ) |
|---|
| The status of the "net.ipv4.ip_forward" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.ip_forward net.ipv4.ip_forward = 0 $ grep net.ipv4.ip_forward /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.ip_forward = 0 If "net.ipv4.ip_forward" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding. |
| Fix Text (F-19392r376755_fix) |
|---|
| To set the runtime status of the "net.ipv4.ip_forward" kernel parameter, run the following command: # sysctl -w net.ipv4.ip_forward=0 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.ip_forward = 0 Issue the following command to make the changes take effect: # sysctl --system |