The system must not respond to ICMPv4 sent to a broadcast address.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-38535	RHEL-06-000092	SV-50336r3_rule		Low

Description
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

STIG	Date
Red Hat Enterprise Linux 6 Security Technical Implementation Guide	2020-05-19

Details

Check Text ( C-46093r3_chk )
The status of the "net.ipv4.icmp_echo_ignore_broadcasts" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.icmp_echo_ignore_broadcasts net.ipv4.icmp_echo_ignore_broadcasts = 1 $ grep net.ipv4.icmp_echo_ignore_broadcasts /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.icmp_echo_ignore_broadcasts = 1 If "net.ipv4.icmp_echo_ignore_broadcasts" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "1", this is a finding.

Check Text ( C-46093r3_chk )

The status of the "net.ipv4.icmp_echo_ignore_broadcasts" kernel parameter can be queried by running the following command:

$ sysctl net.ipv4.icmp_echo_ignore_broadcasts
net.ipv4.icmp_echo_ignore_broadcasts = 1

$ grep net.ipv4.icmp_echo_ignore_broadcasts /etc/sysctl.conf /etc/sysctl.d/*
net.ipv4.icmp_echo_ignore_broadcasts = 1

If "net.ipv4.icmp_echo_ignore_broadcasts" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "1", this is a finding.

Fix Text (F-43483r2_fix)
To set the runtime status of the "net.ipv4.icmp_echo_ignore_broadcasts" kernel parameter, run the following command: # sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.icmp_echo_ignore_broadcasts = 1 Issue the following command to make the changes take effect: # sysctl --system

Fix Text (F-43483r2_fix)

To set the runtime status of the "net.ipv4.icmp_echo_ignore_broadcasts" kernel parameter, run the following command:

# sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1

Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value):

net.ipv4.icmp_echo_ignore_broadcasts = 1

Issue the following command to make the changes take effect:

# sysctl --system