Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must not accept IPv4 source-routed packets on any interface.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-38523 | RHEL-06-000083 | SV-50324r3_rule | Medium |
| Description |
|---|
| Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2020-05-19 |
Details
| Check Text ( C-46081r4_chk ) |
|---|
| The status of the "net.ipv4.conf.all.accept_source_route" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.all.accept_source_route net.ipv4.conf.all.accept_source_route = 0 $ grep net.ipv4.conf.all.accept_source_route /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.conf.all.accept_source_route = 0 If "net.ipv4.conf.all.accept_source_route" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding. |
| Fix Text (F-43471r2_fix) |
|---|
| To set the runtime status of the "net.ipv4.conf.all.accept_source_route" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.all.accept_source_route=0 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.all.accept_source_route = 0 Issue the following command to make the changes take effect: # sysctl --system |