Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must not accept ICMPv4 redirect packets on any interface.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-38524 | RHEL-06-000084 | SV-50325r3_rule | Medium |
| Description |
|---|
| Accepting ICMP redirects has few legitimate uses. It should be disabled unless it is absolutely required. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2019-09-25 |
Details
| Check Text ( C-46082r4_chk ) |
|---|
| The status of the "net.ipv4.conf.all.accept_redirects" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.all.accept_redirects net.ipv4.conf.all.accept_redirects = 0 $ grep net.ipv4.conf.all.accept_redirects /etc/sysctl.conf /etc/sysctl.d/* net.ipv4.conf.all.accept_redirects = 0 If "net.ipv4.conf.all.accept_redirects" is not configured in the /etc/sysctl.conf file or in the /etc/sysctl.d/ directory, is commented out or does not have a value of "0", this is a finding. |
| Fix Text (F-43472r2_fix) |
|---|
| To set the runtime status of the "net.ipv4.conf.all.accept_redirects" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.all.accept_redirects=0 Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" or a config file in the /etc/sysctl.d/ directory (or modify the line to have the required value): net.ipv4.conf.all.accept_redirects = 0 Issue the following command to make the changes take effect: # sysctl --system |