The audit system must be configured to audit all use of setuid and setgid programs.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-38567	RHEL-06-000198	SV-50368r4_rule		Low

Description
Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

STIG	Date
Red Hat Enterprise Linux 6 Security Technical Implementation Guide	2018-09-18

Details

Check Text ( C-46125r7_chk )
To verify that auditing of privileged command use is configured, run the following command once for each local partition [PART] to find relevant setuid / setgid programs: $ sudo find [PART] -xdev -type f -perm /6000 2>/dev/null Run the following command to verify entries in the audit rules for all programs found with the previous command: $ sudo grep path /etc/audit/audit.rules It should be the case that all relevant setuid / setgid programs have a line in the audit rules. If that is not the case, this is a finding.

Check Text ( C-46125r7_chk )

To verify that auditing of privileged command use is configured, run the following command once for each local partition [PART] to find relevant setuid / setgid programs:

$ sudo find [PART] -xdev -type f -perm /6000 2>/dev/null

Run the following command to verify entries in the audit rules for all programs found with the previous command:

$ sudo grep path /etc/audit/audit.rules

It should be the case that all relevant setuid / setgid programs have a line in the audit rules. If that is not the case, this is a finding.

Fix Text (F-43515r6_fix)
At a minimum, the audit system should collect the execution of privileged commands for all users and root. To find the relevant setuid / setgid programs, run the following command for each local partition [PART]: $ sudo find [PART] -xdev -type f -perm /6000 2>/dev/null Then, for each setuid / setgid program on the system, add a line of the following form to "/etc/audit/audit.rules", where [SETUID_PROG_PATH] is the full path to each setuid / setgid program in the list: -a always,exit -F path=[SETUID_PROG_PATH] -F perm=x -F auid>=500 -F auid!=4294967295 -k privileged

Fix Text (F-43515r6_fix)

At a minimum, the audit system should collect the execution of privileged commands for all users and root. To find the relevant setuid / setgid programs, run the following command for each local partition [PART]:

$ sudo find [PART] -xdev -type f -perm /6000 2>/dev/null

Then, for each setuid / setgid program on the system, add a line of the following form to "/etc/audit/audit.rules", where [SETUID_PROG_PATH] is the full path to each setuid / setgid program in the list:

-a always,exit -F path=[SETUID_PROG_PATH] -F perm=x -F auid>=500 -F auid!=4294967295 -k privileged