Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-38544 | RHEL-06-000097 | SV-50345r2_rule | Medium |
Description |
---|
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks. |
STIG | Date |
---|---|
Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2017-04-28 |
Check Text ( None ) |
---|
None |
Fix Text (F-43492r1_fix) |
---|
To set the runtime status of the "net.ipv4.conf.default.rp_filter" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.default.rp_filter=1 If this is not the system's default value, add the following line to "/etc/sysctl.conf": net.ipv4.conf.default.rp_filter = 1 |