Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must ignore ICMPv4 redirect messages by default.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-38533 | RHEL-06-000091 | SV-50334r3_rule | Low |
| Description |
|---|
| This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 6 Security Technical Implementation Guide | 2016-06-05 |
Details
| Check Text ( C-46091r2_chk ) |
|---|
| The status of the "net.ipv4.conf.default.accept_redirects" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.default.accept_redirects The output of the command should indicate a value of "0". If this value is not the default value, investigate how it could have been adjusted at runtime, and verify it is not set improperly in "/etc/sysctl.conf". $ grep net.ipv4.conf.default.accept_redirects /etc/sysctl.conf If the correct value is not returned, this is a finding. |
| Fix Text (F-43481r1_fix) |
|---|
| To set the runtime status of the "net.ipv4.conf.default.accept_redirects" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.default.accept_redirects=0 If this is not the system's default value, add the following line to "/etc/sysctl.conf": net.ipv4.conf.default.accept_redirects = 0 |