UCF STIG Viewer Logo

The system must not accept ICMPv4 redirect packets on any interface.


Overview

Finding ID Version Rule ID IA Controls Severity
RHEL-06-000084 RHEL-06-000084 RHEL-06-000084_rule Medium
Description
Accepting ICMP redirects has few legitimate uses. It should be disabled unless it is absolutely required.
STIG Date
Red Hat Enterprise Linux 6 Security Technical Implementation Guide 2013-02-05

Details

Check Text ( C-RHEL-06-000084_chk )
The status of the "net.ipv4.conf.all.accept_redirects" kernel parameter can be queried by running the following command:

$ sysctl net.ipv4.conf.all.accept_redirects

The output of the command should indicate a value of "0". If this value is not the default value, investigate how it could have been adjusted at runtime, and verify it is not set improperly in "/etc/sysctl.conf".
If the correct value is not returned, this is a finding.
Fix Text (F-RHEL-06-000084_fix)
To set the runtime status of the "net.ipv4.conf.all.accept_redirects" kernel parameter, run the following command:

# sysctl -w net.ipv4.conf.all.accept_redirects=0

If this is not the system's default value, add the following line to "/etc/sysctl.conf":

net.ipv4.conf.all.accept_redirects = 0