The audit system must alert the SA in the event of an audit processing failure.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-22374	GEN002719	SV-68095r2_rule		Low

Description
An accurate and current audit trail is essential for maintaining a record of system activity. If the system fails, the SA must be notified and must take prompt action to correct the problem. Minimally, the system must log this event, and the SA will receive this notification during the daily system log review. If feasible, active alerting (such as e-mail or paging) should be employed consistent with the site's established operations management systems and procedures.

Description

An accurate and current audit trail is essential for maintaining a record of system activity. If the system fails, the SA must be notified and must take prompt action to correct the problem. Minimally, the system must log this event, and the SA will receive this notification during the daily system log review. If feasible, active alerting (such as e-mail or paging) should be employed consistent with the site's established operations management systems and procedures.

STIG	Date
Red Hat Enterprise Linux 5 Security Technical Implementation Guide	2017-03-01

Details

Check Text ( C-54715r1_chk )
Verify the /etc/audit/auditd.conf has the disk_full_action and disk_error_action parameters set. Procedure: # grep disk_full_action /etc/audit/auditd.conf If the disk_full_action parameter is missing or set to "suspend" or "ignore" this is a finding. # grep disk_error_action /etc/audit/auditd.conf If the disk_error_action parameter is missing or set to "suspend" or "ignore" this is a finding.

Fix Text (F-32421r1_fix)
Edit /etc/audit/auditd.conf and set the disk_full_action and/or disk_error_action parameters to a valid setting of "syslog", "exec", "single" or "halt", adding the parameters if necessary.