The system must be configured to send audit/system records to a remote audit server.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-24357	GEN002870	SV-37948r4_rule	ECTB-1	Low

Description
System/Audit records contain evidence that can be used in the investigation of compromised systems. To prevent this evidence from compromise, it must be sent to a separate system continuously. Methods for sending audit records include, but are not limited to, system audit tools used to send logs directly to another host or through the system's syslog service to another host.

STIG	Date
Red Hat Enterprise Linux 5 Security Technical Implementation Guide	2015-09-03

Details

Check Text ( None )
None

Fix Text (F-32440r3_fix)
Configure the system to send audit records to a remote server. Procedure: These instructions assume a known remote audit server is available to this system. Modify /etc/syslog.conf or /etc/rsyslog.conf to contain a line sending all audit records to a remote audit server. The server is specified by placing an "@" before the DNS name or IP address in the line. . @ Edit the "active" line in /etc/audisp/plugins.d/syslog.conf so it shows "active = yes". Restart audit and syslog: # service auditd restart # service syslog restart Or: # service rsyslog restart

Fix Text (F-32440r3_fix)

Configure the system to send audit records to a remote server.

Procedure:
These instructions assume a known remote audit server is available to this system.
Modify /etc/syslog.conf or /etc/rsyslog.conf to contain a line sending all audit records to a remote audit server. The server is specified by placing an "@" before the DNS name or IP address in the line.

*.* @

Edit the "active" line in /etc/audisp/plugins.d/syslog.conf so it shows "active = yes".

Restart audit and syslog:
# service auditd restart
# service syslog restart
Or:
# service rsyslog restart