The audit system must be configured to audit the loading and unloading of dynamic kernel modules

The audit system must be configured to audit the loading and unloading of dynamic kernel modules - delete_module.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-29281	GEN002825-2	SV-37728r1_rule	ECAR-1 ECAR-2 ECAR-3	Medium

Description
Actions concerning dynamic kernel modules must be recorded as they are substantial events. Dynamic kernel modules can increase the attack surface of a system. A malicious kernel module can be used to substantially alter the functioning of a system, often with the purpose of hiding a compromise from the SA.

STIG	Date
Red Hat Enterprise Linux 5 Security Technical Implementation Guide	2014-07-02

Details

Check Text ( None )
None

Fix Text (F-32192r1_fix)
The "-F arch=" restriction is required on dual-architecture systems (such as x86_64). On dual-architecture systems, two separate rules must exist - one for each architecture supported. Use the generic architectures "b32" and "b64" for specifying these rules. On single architecture systems, the "-F arch=" restriction may be omitted, but if present must match either the architecture of the system or its corresponding generic architecture. The architecture of the system may be determined by running "uname -m". See the auditctl(8) manpage for additional details. Any restrictions (such as with "-F") beyond those provided in the example rules are not in strict compliance with this requirement, and are a finding unless justified and documented appropriately. The use of audit keys consistent with the provided example is encouraged to provide for uniform audit logs, however omitting the audit key or using an alternate audit key is not a finding. Procedure: Configure auditing of the delete_module syscalls. Add the following to the "etc/audit/audit.rules" or "etc/audit.rules" file: -a exit,always -S delete_module Restart the auditd service. # service auditd restart

Fix Text (F-32192r1_fix)

The "-F arch=" restriction is required on dual-architecture systems (such as x86_64). On dual-architecture systems, two separate rules must exist - one for each architecture supported. Use the generic architectures "b32" and "b64" for specifying these rules.
On single architecture systems, the "-F arch=" restriction may be omitted, but if present must match either the architecture of the system or its corresponding generic architecture. The architecture of the system may be determined by running "uname -m". See the auditctl(8) manpage for additional details.
Any restrictions (such as with "-F") beyond those provided in the example rules are not in strict compliance with this requirement, and are a finding unless justified and documented appropriately.
The use of audit keys consistent with the provided example is encouraged to provide for uniform audit logs, however omitting the audit key or using an alternate audit key is not a finding.
Procedure:
Configure auditing of the delete_module syscalls.
Add the following to the "etc/audit/audit.rules" or "etc/audit.rules" file:

-a exit,always -S delete_module

Restart the auditd service.
# service auditd restart