Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must not send IPv4 Internet Control Message Protocol (ICMP) redirects.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-22417 | GEN003610 | SV-37629r1_rule | ECSC-1 | Medium |
| Description |
|---|
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 5 Security Technical Implementation Guide | 2013-07-03 |
Details
| Check Text ( C-36828r1_chk ) |
|---|
| Verify the system does not send IPv4 ICMP redirect messages. # grep [01] /proc/sys/net/ipv4/conf/*/send_redirects|egrep "default|all" If all of the resulting lines do not end with "0", this is a finding. |
| Fix Text (F-31666r1_fix) |
|---|
| Configure the system to not send IPv4 ICMP redirect messages. Edit /etc/sysctl.conf and add a setting for "net.ipv4.conf.all.send_redirects=0" and "net.ipv4.conf.default.send_redirects=0". # sysctl -p |