X displays must not be exported to the world.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-4697	GEN005200	SV-37683r1_rule	ECSC-1	High

Description
Open X displays allow an attacker to capture keystrokes and to execute commands remotely. Many users have their X Server set to “xhost +”, permitting access to the X Server by anyone, from anywhere.

STIG	Date
Red Hat Enterprise Linux 5 Security Technical Implementation Guide	2013-04-10

Details

Check Text ( C-36872r2_chk )
If Xwindows is not used on the system, this is not applicable. Check the output of the "xhost" command from an X terminal. Procedure: # xhost If the output reports access control is enabled (and possibly lists the hosts able to receive X window logins), this is not a finding. If the xhost command returns a line indicating access control is disabled, this is a finding. Note: It may be necessary to define the display if the command reports it cannot open the display. Procedure: $ DISPLAY=MachineName:0.0; export DISPLAY MachineName may be replaced with an Internet Protocol Address. Repeat the check procedure after setting the display.

Check Text ( C-36872r2_chk )

If Xwindows is not used on the system, this is not applicable.

Check the output of the "xhost" command from an X terminal.

Procedure:
# xhost
If the output reports access control is enabled (and possibly lists the hosts able to receive X window logins), this is not a finding. If the xhost command returns a line indicating access control is disabled, this is a finding.

Note: It may be necessary to define the display if the command reports it cannot open the display.

Procedure:
$ DISPLAY=MachineName:0.0; export DISPLAY
MachineName may be replaced with an Internet Protocol Address. Repeat the check procedure after setting the display.

Fix Text (F-31847r1_fix)
If using an xhost-type authentication the "xhost -" command can be used to remove current trusted hosts and then selectively allow only trusted hosts to connect with "xhost +" commands. A cryptographically secure authentication, such as provided by the xauth program, is always preferred. Refer to your X11 server's documentation for further security information.