UCF STIG Viewer Logo

The network element’s management interface is not configured as passive for the IGP instance deployed in the managed network.


Overview

Finding ID Version Rule ID IA Controls Severity
V-17823 NET0993 SV-19335r2_rule Low
Description
The OOBM access switch will connect to the management interface of the managed network elements. The management interface can be a true OOBM interface or a standard interface functioning as the management interface. In either case, the management interface of the managed network element will be directly connected to the OOBM network. An OOBM interface does not forward transit traffic; thereby, providing complete separation of production and management traffic. Since all management traffic is immediately forwarded into the management network, it is not exposed to possible tampering. The separation also ensures congestion or failures in the managed network do not affect the management of the device. If the device does not have an OOBM port, the interface functioning as the management interface must be configured so management traffic, both data plane and control plane, does not leak into the managed network and production traffic does not leak into the management network.
STIG Date
Perimeter Router Security Technical Implementation Guide Juniper 2018-11-28

Details

Check Text ( C-20314r4_chk )
If the managed network element is a layer 3 device, review the configuration to verify the management interface is configured as passive for the IGP instance for the managed network. With JUNOS, routing protocols are enabled on the interfaces by specifying the interface under the routing protocol hierarchy. The following configuration would be an example where OSPF is only enabled on all interfaces except the management interface:


interfaces {
fe-0/0/0 {
description “link to our Private Net”
unit 0 {
family inet {
address 172.20.4.2/24;
}
}
}
fe-0/0/1 {
description “link to our Service Net”
unit 0 {
family inet {
address 172.20.5.2/24;
}
}
}
fe-0/0/2 {
description “link to our Management LAN”
unit 0 {
family inet {
filter {
input OOBM-ingress-filter;
output OOBM-egress-filter;
}
address 10.1.1.22/24;
}
}
}
}
protocols {
ospf {
area 0.0.0.0 {
interface fe-0/0/0.0;
interface fe-0/0/1.0;
}
}
}
Fix Text (F-17738r2_fix)
Configure the management interface as passive for the IGP instance configured for the managed network. Depending on the platform and routing protocol, this may simply require that the interface or its IP address is not included in the IGP configuration.