The network element must have HTTP service for administrative access disabled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-3085	NET0740	SV-41467r2_rule		Medium

Description
The additional services the router is enabled for increases the risk for an attack since the router will listen for these services. In addition, these services provide an unsecured method for an attacker to gain access to the router. Most recent software versions support remote configuration and monitoring using the World Wide Web's HTTP protocol. In general, HTTP access is equivalent to interactive access to the router. The authentication protocol used for HTTP is equivalent to sending a clear-text password across the network, and, unfortunately, there is no effective provision in HTTP for challenge-based or one-time passwords. This makes HTTP a relatively risky choice for use across the public Internet. Any additional services that are enabled increase the risk for an attack since the router will listen for these services. The HTTPS server may be enabled for administrative access.

Description

The additional services the router is enabled for increases the risk for an attack since the router will listen for these services. In addition, these services provide an unsecured method for an attacker to gain access to the router. Most recent software versions support remote configuration and monitoring using the World Wide Web's HTTP protocol. In general, HTTP access is equivalent to interactive access to the router. The authentication protocol used for HTTP is equivalent to sending a clear-text password across the network, and, unfortunately, there is no effective provision in HTTP for challenge-based or one-time passwords. This makes HTTP a relatively risky choice for use across the public Internet. Any additional services that are enabled increase the risk for an attack since the router will listen for these services. The HTTPS server may be enabled for administrative access.

STIG	Date
Perimeter Router Security Technical Implementation Guide Cisco	2018-02-27

Details

Check Text ( C-39966r3_chk )
Verify the command "ip http-server" is not enabled in the configuration (the HTTPS server may be enabled for administrative access). As of 12.4, the http server is disabled by default. However, since many defaults are not shown by IOS, you may not see the command "no ip http-server" in the configuration depending on the release. If the HTTP server is enabled, this is a finding.

Fix Text (F-3110r4_fix)
Configure the device to disable using HTTP (port 80) for administrative access.