Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-5628 | NET-VLAN-006 | SV-5628r2_rule | ECSC-1 | Medium |
Description |
---|
All ports, including the internal sc0 interface, are configured by default to be members of VLAN 1. In a VLAN-based network, switches use VLAN 1 as the default VLAN for in-band management and to communicate with other networking devices using Spanning-Tree Protocol (STP), Cisco Discovery Protocol (CDP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggregation Protocol (PAgP) all untagged traffic. As a consequence, VLAN 1 may unwisely span the entire network if not appropriately pruned. If its scope is large enough, the risk of compromise can increase significantly. |
STIG | Date |
---|---|
Perimeter L3 Switch Security Technical Implementation Guide | 2015-12-18 |
Check Text ( C-3767r3_chk ) |
---|
Review the device configurations to determine if a dedicated VLAN(s) have been implemented for the management network. VLAN 1 must not be used. If a dedicated VLAN or VLANs have not been established for the management network, this is a finding. If VLAN 1 is used for management, this is also a finding. |
Fix Text (F-5539r2_fix) |
---|
Best practices for VLAN-based networks is create a dedicated management VLAN, prune unnecessary ports from gaining access to VLAN 1 as well as the management VLAN, and to separate in-band management, device protocol, and data traffic. |