The Palo Alto Networks security platform must generate an audit log record when the Data Plane CPU utilization is 100%.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-228677	PANW-NM-000144	SV-228677r513636_rule		Medium

Description
Auditing and logging are key components of any security architecture. Logging the actions of specific events provides a means to investigate an attack; to recognize resource utilization or capacity thresholds; or to identify an improperly configured network device. If auditing is not comprehensive, it will not be useful for intrusion monitoring, security investigations, and forensic analysis. If the Data Plane CPU utilization is 100%, this may indicate an attack or simply an over-utilized device. In either case, action must be taken to identify the source of the issue and take corrective action.

Description

Auditing and logging are key components of any security architecture. Logging the actions of specific events provides a means to investigate an attack; to recognize resource utilization or capacity thresholds; or to identify an improperly configured network device. If auditing is not comprehensive, it will not be useful for intrusion monitoring, security investigations, and forensic analysis. If the Data Plane CPU utilization is 100%, this may indicate an attack or simply an over-utilized device. In either case, action must be taken to identify the source of the issue and take corrective action.

STIG	Date
Palo Alto Networks NDM Security Technical Implementation Guide	2022-09-14

Details

Check Text ( C-30912r513634_chk )
Go to Device >> Setup >> Management In the "Logging and Reporting Settings" pane. If the "Enable Log on High DP Load" check box is not selected, this is a finding.

Fix Text (F-30889r513635_fix)
Go to Device >> Setup >> Management In the "Logging and Reporting Settings" pane, select the "Edit" icon (the gear symbol in the upper-right corner of the pane). In the "Log Export and Reporting" tab, select the "Enable Log on High DP Load" check box. Select "OK". Commit changes by selecting "Commit" in the upper-right corner of the screen. Select "OK" when the confirmation dialog appears.