UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The OL 8 System must take appropriate action when an audit processing failure occurs.


Overview

Finding ID Version Rule ID IA Controls Severity
V-248726 OL08-00-030040 SV-248726r779744_rule Medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
STIG Date
Oracle Linux 8 Security Technical Implementation Guide 2023-09-11

Details

Check Text ( C-52160r779742_chk )
Verify OL 8 takes the appropriate action when an audit processing failure occurs with the following command:

$ sudo grep disk_error_action /etc/audit/auditd.conf

disk_error_action = HALT

If the value of the "disk_error_action" option is not "SYSLOG", "SINGLE", or "HALT", or the line is commented out, this is a finding.
Fix Text (F-52114r779743_fix)
Configure OL 8 to shut down by default upon audit failure (unless availability is an overriding concern).

Add or update the following line ("disk_error_action" can be set to "SYSLOG" or "SINGLE" depending on configuration) in the "/etc/audit/auditd.conf" file:

disk_error_action = HALT

If availability has been determined to be more important, and this decision is documented with the ISSO, configure OL 8 to notify system administration staff and ISSO staff in the event of an audit processing failure by setting the "disk_error_action" to "SYSLOG".