UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Oracle Linux operating system must not forward IPv6 source-routed packets.


Overview

Finding ID Version Rule ID IA Controls Severity
V-221894 OL07-00-040830 SV-221894r880666_rule Medium
Description
Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.
STIG Date
Oracle Linux 7 Security Technical Implementation Guide 2023-06-02

Details

Check Text ( C-23609r880664_chk )
If IPv6 is not enabled, the key will not exist, and this is Not Applicable.

Verify the system does not accept IPv6 source-routed packets.

# grep -r net.ipv6.conf.all.accept_source_route /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null
net.ipv6.conf.all.accept_source_route = 0

If "net.ipv6.conf.all.accept_source_route" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out or does not have a value of "0", this is a finding.

Check that the operating system implements the accept source route variable with the following command:

# /sbin/sysctl -a | grep net.ipv6.conf.all.accept_source_route
net.ipv6.conf.all.accept_source_route = 0

If the returned lines do not have a value of "0", this is a finding.

If conflicting results are returned, this is a finding.
Fix Text (F-23598r880665_fix)
Set the system to the required kernel parameter, if IPv6 is enabled, by adding the following line to "/etc/sysctl.conf" or a configuration file in the /etc/sysctl.d/ directory (or modify the line to have the required value):

net.ipv6.conf.all.accept_source_route = 0

Issue the following command to make the changes take effect:

# sysctl --system