Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The system must not accept IPv4 source-routed packets by default.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-50647 | OL6-00-000089 | SV-64853r2_rule | Medium |
| Description |
|---|
| Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required. |
| STIG | Date |
|---|---|
| Oracle Linux 6 Security Technical Implementation Guide | 2016-12-20 |
Details
| Check Text ( C-53151r2_chk ) |
|---|
| The status of the "net.ipv4.conf.default.accept_source_route" kernel parameter can be queried by running the following command: $ sysctl net.ipv4.conf.default.accept_source_route The output of the command should indicate a value of "0". If this value is not the default value, investigate how it could have been adjusted at runtime, and verify it is not set improperly in "/etc/sysctl.conf". $ grep net.ipv4.conf.default.accept_source_route /etc/sysctl.conf If the correct value is not returned, this is a finding. |
| Fix Text (F-55443r1_fix) |
|---|
| To set the runtime status of the "net.ipv4.conf.default.accept_source_route" kernel parameter, run the following command: # sysctl -w net.ipv4.conf.default.accept_source_route=0 If this is not the system's default value, add the following line to "/etc/sysctl.conf": net.ipv4.conf.default.accept_source_route = 0 |