If the site has a non-DoD external connection (i.e. Approved Gateway), an Intrusion Detection and Prevention System (IDPS) must be located between the sites Approved Gateway and the perimeter router.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-14634	NET0168	SV-15259r4_rule		Medium

Description
The incorrect placement of the external IDPS may allow unauthorized access to go undetected and limit the ability of security personnel to stop malicious or unauthorized use of the network. In order to ensure that an attempted or existing attack goes unnoticed, the data from the sensors must be monitored continuously.

STIG	Date
Network Infrastructure Policy Security Technical Implementation Guide	2019-09-30

Details

Check Text ( C-12650r4_chk )
Inspect the network topology and physical connectivity to verify compliance. If the site has a non-DoD external connection and does not have an IDPS located between the site’s Approved Gateway and the perimeter router, this is a finding. Note: An Approved Gateway (AG) is any external connection from a DoD NIPRNet enclave to an Internet Service Provider, or network owned by a contractor, or non-DoD federal agency that has been approved by either the DoD CIO or the DoD Component CIO. This AG requirement does not apply to commercial cloud connections when the Cloud Service Provider (CSP) network is connected via the NIPRNet Boundary Cloud Access Point (BCAP).

Check Text ( C-12650r4_chk )

Inspect the network topology and physical connectivity to verify compliance.

If the site has a non-DoD external connection and does not have an IDPS located between the site’s Approved Gateway and the perimeter router, this is a finding.

Note: An Approved Gateway (AG) is any external connection from a DoD NIPRNet enclave to an Internet Service Provider, or network owned by a contractor, or non-DoD federal agency that has been approved by either the DoD CIO or the DoD Component CIO. This AG requirement does not apply to commercial cloud connections when the Cloud Service Provider (CSP) network is connected via the NIPRNet Boundary Cloud Access Point (BCAP).

Fix Text (F-14096r3_fix)
Install and configure an IDPS between the site’s Approved Gateway and the premise router.