Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) report messages must be filtered to allow hosts to join only those multicast groups that have been approved by the organization.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-66381	NET2013	SV-80871r1_rule		Low

Description
Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (e.g., someone doing a file download here or there), whereas multicast can have broader impact on bandwidth consumption resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups that hosts are allowed to join via IGMP (IPv4) or MLD (IPv6).

Description

Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (e.g., someone doing a file download here or there), whereas multicast can have broader impact on bandwidth consumption resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups that hosts are allowed to join via IGMP (IPv4) or MLD (IPv6).

STIG	Date
Network Infrastructure Policy Security Technical Implementation Guide	2016-12-22

Details

Check Text ( C-67027r1_chk )
Review the configuration of the DR to verify that it is filtering IGMP or MLD report messages allowing hosts to only join those groups that have been approved by the organization. If the DR is not filtering IGMP or MLD report messages, this is a finding. The following is a PIM sparse mode configuration example filtering specific multicast groups as defined in access-list 11 on the LAN-facing interface. ip multicast-routing ! interface FastEthernet 0/0 description link to core ip address 192.168.123.2 255.255.255.0 ip pim sparse-mode ! interface FastEthernet 0/1 description User LAN ip address 192.168.122.1 255.255.255.0 ip pim sparse-mode ip igmp access-group 11 ! access-list 11 permit 224.10.10.0 0.0.0.255 access-list 11 permit 224.11.11.0 0.0.0.255 access-list 11 permit 224.20.20.0 0.0.0.255

Check Text ( C-67027r1_chk )

Review the configuration of the DR to verify that it is filtering IGMP or MLD report messages allowing hosts to only join those groups that have been approved by the organization.

If the DR is not filtering IGMP or MLD report messages, this is a finding.

The following is a PIM sparse mode configuration example filtering specific multicast groups as defined in access-list 11 on the LAN-facing interface.

ip multicast-routing
!
interface FastEthernet 0/0
description link to core
ip address 192.168.123.2 255.255.255.0
ip pim sparse-mode
!
interface FastEthernet 0/1
description User LAN
ip address 192.168.122.1 255.255.255.0
ip pim sparse-mode
ip igmp access-group 11
!
access-list 11 permit 224.10.10.0 0.0.0.255
access-list 11 permit 224.11.11.0 0.0.0.255
access-list 11 permit 224.20.20.0 0.0.0.255

Fix Text (F-72457r1_fix)
Configure the Designated Router (DR) to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) report messages to allow tenant hosts to join only those multicast groups that have been approved by the organization.