Exchange Internal Receive connectors must not allow anonymous connections.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-70033	EX13-MB-000235	SV-84655r1_rule		Medium

Description
This control is used to limit the servers that may use this server as a relay. If a Simple Mail Transport Protocol (SMTP) sender does not have a direct connection to the Internet (for example, an application that produces reports to be emailed) then it will need to use an SMTP Receive connector that does have a path to the Internet (for example, a local email server) as a relay. SMTP relay functions must be protected so third parties are not able to hijack a relay service for their own purposes. Most commonly, hijacking of relays is done by spammers to disguise the source of their messages and may also be used to cover the source of more destructive attacks. Relays can be restricted in one of three ways: by blocking relays (restrict to a blank list of servers), by restricting use to lists of valid servers, or by restricting use to servers that can authenticate. Because authenticated connections are the most secure for SMTP Receive connectors, it is recommended that relays allow only servers that can authenticate.

Description

This control is used to limit the servers that may use this server as a relay. If a Simple Mail Transport Protocol (SMTP) sender does not have a direct connection to the Internet (for example, an application that produces reports to be emailed) then it will need to use an SMTP Receive connector that does have a path to the Internet (for example, a local email server) as a relay. SMTP relay functions must be protected so third parties are not able to hijack a relay service for their own purposes. Most commonly, hijacking of relays is done by spammers to disguise the source of their messages and may also be used to cover the source of more destructive attacks. Relays can be restricted in one of three ways: by blocking relays (restrict to a blank list of servers), by restricting use to lists of valid servers, or by restricting use to servers that can authenticate. Because authenticated connections are the most secure for SMTP Receive connectors, it is recommended that relays allow only servers that can authenticate.

STIG	Date
MS Exchange 2013 Mailbox Server Security Technical Implementation Guide	2019-09-25

Details

Check Text ( C-70507r1_chk )
Open the Exchange Management Shell and enter the following command: Get-ReceiveConnector \| Select Name, Identity, PermissionGroups For each Receive connector, if the value of PermissionGroups is AnonymousUsers for any receive connector, this is a finding.

Fix Text (F-76269r1_fix)
Open the Exchange Management Shell and enter the following command: Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups and enter a valid value user group. Note: The value must be in quotes. Example: Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups ExchangeUsers This is an Example only: Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups ExchangeUsers Repeat the procedures for each Receive connector.

Fix Text (F-76269r1_fix)

Open the Exchange Management Shell and enter the following command:

Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups and enter a valid value user group.

Note: The value must be in quotes.

Example: Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups ExchangeUsers

This is an Example only: Set-ReceiveConnector -Identity <'IdentityName'> -PermissionGroups ExchangeUsers

Repeat the procedures for each Receive connector.