Exchange must limit the Receive connector timeout.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-69783	EX13-EG-000005	SV-84405r1_rule		Medium

Description
Email system availability depends in part on best practices strategies for setting tuning. This configuration controls the number of idle minutes before the connection is dropped. It works in conjunction with the Maximum Inbound Connections Count setting. Connections, once established, may incur delays in message transfer. If the timeout period is too long, there is risk that connections may be maintained for unnecessarily long time periods, preventing new connections from being established.

Description

Email system availability depends in part on best practices strategies for setting tuning. This configuration controls the number of idle minutes before the connection is dropped. It works in conjunction with the Maximum Inbound Connections Count setting. Connections, once established, may incur delays in message transfer. If the timeout period is too long, there is risk that connections may be maintained for unnecessarily long time periods, preventing new connections from being established.

STIG	Date
MS Exchange 2013 Edge Transport Server Security Technical Implementation Guide	2019-03-11

Details

Check Text ( C-70235r1_chk )
Review the Email Domain Security Plan (EDSP). Determine the connection Timeout value. Open the Exchange Management Shell and enter the following command: Get-ReceiveConnector \| Select Name, Identity, ConnectionTimeout For each Receive connector, if the value of ConnectionTimeout is not set to 00:05:00, this is a finding. or If ConnectionTimeout is set to another value other than 00:05:00 and has signoff and risk acceptance in the EDSP, this is not a finding.

Check Text ( C-70235r1_chk )

Review the Email Domain Security Plan (EDSP).

Determine the connection Timeout value.

Open the Exchange Management Shell and enter the following command:

Get-ReceiveConnector | Select Name, Identity, ConnectionTimeout

For each Receive connector, if the value of ConnectionTimeout is not set to 00:05:00, this is a finding.

or

If ConnectionTimeout is set to another value other than 00:05:00 and has signoff and risk acceptance in the EDSP, this is not a finding.

Fix Text (F-75995r1_fix)
Update the EDSP. Open the Exchange Management Shell and enter the following command: Set-ReceiveConnector -Identity <'IdentityName'> -ConnectionTimeout 00:05:00 Note: The value must be in single quotes. or The value as identified by the EDSP that has obtained a signoff with risk acceptance. Repeat the procedures for each Receive connector.