{
"stig": {
"date": "2020-10-16",
"description": "This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil.",
"findings": {
"V-230077": {
"checkid": "C-32392r538227_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device is enforcing a minimum password length of six characters.\n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Verify the minimum password length is set to \"6\" characters.\n\nOn the Android Pie device: \n1. Open Settings >> Security & location >> Screen lock.\n2. Enter current password.\n3. Tap on \"Password\".\n4. Verify Password length listed is at least \"6\".\n\nIf the device password length is not set to six characters or more on the MDM console or the Android Pie device, this is a finding.",
"description": "Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. The ability to crack a password is a function of how many attempts an adversary is permitted, how quickly an adversary can do each attempt, and the size of the password space. The longer the minimum length of the password is, the larger the password space. Having a too-short minimum password length significantly reduces password strength, increasing the chance of password compromise and resulting in device and data compromise.\n\nSFR ID: FMT_SMF_EXT.1.1 #1a",
"fixid": "F-32370r538228_fix",
"fixtext": "Configure the Motorola Android device to enforce a minimum password length of six characters.\n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Enter the number of characters as \"6\".",
"iacontrols": null,
"id": "V-230077",
"ruleID": "SV-230077r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to enforce a minimum password length of six characters.",
"version": "MOTO-09-000100"
},
"V-230078": {
"checkid": "C-32393r538230_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device is prohibiting passwords with more than two repeating or sequential characters. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Verify the password quality is set to \"Complex\".\n\nOn the Android Pie device: \n1. Open Settings >> Security & location >> Screen lock.\n2. Enter current password.\n3. Tap on \"Password\".\n4. Verify Password complexity requirements are listed: must contain at least one letter, one numeric digit, one special symbol.\n\nIf the MDM console device policy is set to a password with more than two repeating or sequential characters, or on the Android Pie device, the device policy is set to a password with more than two repeating or sequential characters, this is a finding.",
"description": "Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. Passwords that contain repeating or sequential characters are significantly easier to guess than those that do not contain repeating or sequential characters. Therefore, disallowing repeating or sequential characters increases password strength and decreases risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #1b",
"fixid": "F-32371r538231_fix",
"fixtext": "Configure the Motorola Android device to prevent passwords from containing more than two repeating or sequential characters.\n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Set password quality to \"Complex\".",
"iacontrols": null,
"id": "V-230078",
"ruleID": "SV-230078r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to not allow passwords that include more than two repeating or sequential characters.",
"version": "MOTO-09-000200"
},
"V-230079": {
"checkid": "C-32394r538233_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device is enforcing a screen lock policy that will lock the display after a period of inactivity.\n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Verify \"Device Lock Timeout\" is set to any number desired. Units are in minutes.\n\nOn the Android Pie device: \n1. Open Settings >> Security & location.\n2. Click the gear icon next to \"Screen lock\".\n3. Verify \"Automatically lock\" is set to a required time.\n\nIf the MDM console device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, or on the Android Pie device, the device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, this is a finding.",
"description": "The screen lock timeout helps protect the device from unauthorized access. Devices without a screen lock timeout provide an opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device and possibly access to DoD networks.\n\nSFR ID: FMT_SMF_EXT.1.1 #2a",
"fixid": "F-32372r538234_fix",
"fixtext": "Configure the Motorola Android device to enable a screen lock policy that will lock the display after a period of inactivity.\n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Set \"Device Lock Timeout\" to any number desired. Units are in minutes.",
"iacontrols": null,
"id": "V-230079",
"ruleID": "SV-230079r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to enable a screen lock policy that will lock the display after a period of inactivity.",
"version": "MOTO-09-000300"
},
"V-230080": {
"checkid": "C-32395r538236_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has the screen lock timeout set to 15 minutes or less.\n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open passcode requirements.\n2. Open device passcode section.\n3. Verify \"Device Lock Timeout\" is set to any number between 1 and 15.\n\nOn the Android Pie device: \n1. Open Settings >> Security & location.\n2. Click the gear icon next to \"Screen lock\".\n3. Verify \"Automatically lock\" is set to between 0 and 15 minutes.\n\nIf the MDM console device policy is not set to 15 minutes or less for the screen lock timeout, or on the Android Pie device, the device policy is not set to 15 minutes or less for the screen lock timeout, this is a finding.",
"description": "The screen lock timeout must be set to a value that helps protect the device from unauthorized access. Having a too-long timeout would increase the window of opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device. The maximum timeout period of 15 minutes has been selected to balance functionality and security; shorter timeout periods may be appropriate depending on the risks posed to the mobile device.\n\nSFR ID: FMT_SMF_EXT.1.1 #2b",
"fixid": "F-32373r538237_fix",
"fixtext": "Configure the Motorola Android device to lock the device display after 15 minutes (or less) of inactivity.\n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Set \"Device Lock Timeout\" to any number between 1 and 15.",
"iacontrols": null,
"id": "V-230080",
"ruleID": "SV-230080r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to lock the display after 15 minutes (or less) of inactivity.",
"version": "MOTO-09-000400"
},
"V-230081": {
"checkid": "C-32396r538239_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has the maximum number of consecutive failed authentication attempts set at 10 or fewer. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Review the policy configuration that was pushed down to the device and verify the \"Maximum Number of Failed Attempts\" is set to between 1 and 10.\n\nOn the Android Pie device: \n1. Open Setting >> Security & location >> Managed device info. \n2. Verify \"Failed password attempts before deleting all device data\" is set to 10 or fewer attempts.\n\nIf the MDM console device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer or on the Android Pie device, the device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer, this is a finding.",
"description": "The more attempts an adversary has to guess a password, the more likely the adversary will enter the correct password and gain access to resources on the device. Setting a limit on the number of attempts mitigates this risk. Setting the limit at 10 or less gives authorized users the ability to make a few mistakes when entering the password but still provides adequate protection against dictionary or brute force attacks on the password.\n\nSFR ID: FMT_SMF_EXT.1.1 #2c, FIA_AFL_EXT.1.5",
"fixid": "F-32374r538240_fix",
"fixtext": "Configure the Motorola Android device to allow only 10 or fewer consecutive failed authentication attempts.\n\nOn the MDM console: \n1. Open password requirements.\n2. Open device password section.\n3. Set \"Maximum Number of Failed Attempts\" to a number between 1 and 10.",
"iacontrols": null,
"id": "V-230081",
"ruleID": "SV-230081r569708_rule",
"severity": "low",
"title": "The Motorola Android Pie must be configured to not allow more than 10 consecutive failed authentication attempts.",
"version": "MOTO-09-000500"
},
"V-230082": {
"checkid": "C-32397r538242_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has only approved application repositories (DoD-approved commercial app repository, MDM server, and/or mobile application store).\n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Restrictions section.\n2. Set Allow \"Google Play\" (Uses only Managed Google Play).\n3. Verify that Disallow is set for \"Install unknown sources\".\n\nOn the Motorola device: \n1. Open Settings >> Apps and notifications >> Advanced >> Special app access.\n2. Open \"Install unknown apps\".\n3. Verify the list of apps is blank or if an app is on the list, \"Disabled by admin\" is listed under the app name.\n\nIf the MDM console device policy is not set to allow connections to only approved application repositories, or on the Android Pie device, the device policy is not set to allow connections to only approved application repositories, this is a finding.",
"description": "Forcing all applications to be installed from authorized application repositories can prevent unauthorized and malicious applications from being installed and executed on mobile devices. Allowing such installations and executions could cause a compromise of DoD data accessible by these unauthorized/malicious applications.\n\nSFR ID: FMT_SMF_EXT.1.1 #8a",
"fixid": "F-32375r538243_fix",
"fixtext": "Configure the Motorola Android device to disable unauthorized application repositories.\n\nOn the MDM console: \n1. Open Restrictions section.\n2. Set Allow \"Google Play\" (Uses only Managed Google Play).\n3. Set Disallow \"Install unknown sources\".",
"iacontrols": null,
"id": "V-230082",
"ruleID": "SV-230082r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to enforce an application installation policy by specifying one or more authorized application repositories, including [selection: DoD-approved commercial app repository, MDM server, mobile application store].",
"version": "MOTO-09-000800"
},
"V-230083": {
"checkid": "C-32398r538245_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has an application whitelist configured. Verify all applications listed on the whitelist have been approved by the Approving Official (AO).\n\nThis validation procedure is performed only on the MDM Administration Console.\n\nOn the MDM console: \n1. Go to the Android app catalog for managed Google Play.\n2. Verify all selected apps are AO approved.\n\nNOTE: Managed Google Play is always a Whitelisted App Store.\n\nIf on the MDM console the list of selected Managed Google Play apps includes non-approved apps, this is a finding.\n\nNOTE: The application whitelist will include approved core applications (included in the OS by the OS vendor) and pre-installed applications (provided by the MD vendor and wireless carrier), or the MD must provide an alternate method of restricting user access/execution to core and pre-installed applications. For Google Android, there are no pre-installed applications.",
"description": "The application whitelist, in addition to controlling the installation of applications on the mobile device (MD), must control user access/execution of all core and preinstalled applications, or the MD must provide an alternate method of restricting user access/execution to core and pre-installed applications. \n\nCore application: Any application integrated into the OS by the OS or MD vendors.\n\nPre-installed application: Additional non-core applications included in the operating system (OS) build by the OS vendor, MD vendor, or wireless carrier.\n\nRequiring all authorized applications to be in an application whitelist prevents the execution of any applications (e.g., unauthorized, malicious) that are not part of the whitelist. Failure to configure an application whitelist properly could allow unauthorized and malicious applications to be downloaded, installed, and executed on the mobile device, causing a compromise of DoD data accessible by these applications.\n\nThe application whitelist, in addition to controlling the installation of applications on the MD, must control user access/execution of all core applications (included in the OS by the OS vendor) and pre-installed applications (provided by the MD vendor and wireless carrier), or the MD must provide an alternate method of restricting user access/execution to core and pre-installed applications.\n\nSFR ID: FMT_SMF_EXT.1.1 #8b",
"fixid": "F-32376r538246_fix",
"fixtext": "Configure the Motorola Android device to use an application whitelist.\n\nOn the MDM console: \n1. Go to the Android app catalog for managed Google Play.\n2. Select apps to be available (only approved apps).\n3. Push updated policy to the device.\n\nNOTE: Managed Google Play is always a Whitelisted App Store.",
"iacontrols": null,
"id": "V-230083",
"ruleID": "SV-230083r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to enforce an application installation policy by specifying an application whitelist that restricts applications by the following characteristics: [selection: list of digital signatures, cryptographic hash values, names, application version].",
"version": "MOTO-09-001000"
},
"V-230084": {
"checkid": "C-32399r538248_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has an application whitelist configured and that the application whitelist does not include applications with the following characteristics:\n\n- back up MD data to non-DoD cloud servers (including user and application access to cloud backup services);\n- transmit MD diagnostic data to non-DoD servers;\n- voice assistant application if available when MD is locked;\n- voice dialing application if available when MD is locked;\n- allows synchronization of data or applications between devices associated with user;\n- payment processing; and\n- allows unencrypted (or encrypted but not FIPS 140-2 validated) data sharing with other MDs, display screens (screen mirroring), or printers.\n\nThis validation procedure is performed only on the MDM Administration Console.\n\nOn the MDM console: \n1. Review the list of selected Managed Google Play apps.\n2. Review the details and privacy policy of each selected app to verify the app does not include prohibited characteristics.\n\nIf the MDM console device policy includes applications with unauthorized characteristics, this is a finding.",
"description": "Requiring all authorized applications to be in an application whitelist prevents the execution of any applications (e.g., unauthorized, malicious) that are not part of the whitelist. Failure to configure an application whitelist properly could allow unauthorized and malicious applications to be downloaded, installed, and executed on the mobile device, causing a compromise of DoD data accessible by these applications. Applications with the listed characteristics have features that can cause the compromise of sensitive DoD data or have features with no known application in the DoD environment.\n\nApplication note: The application whitelist, in addition to controlling the installation of applications on the mobile device (MD), must control user access/execution of all core and preinstalled applications, or the MD must provide an alternate method of restricting user access/execution to core and pre-installed applications.\n\nCore application: Any application integrated into the operating system (OS) by the OS or MD vendors.\n\nPre-installed application: Additional non-core applications included in the OS build by the OS vendor, MD vendor, or wireless carrier.\n\nSFR ID: FMT_SMF_EXT.1.1 #8b",
"fixid": "F-32377r538249_fix",
"fixtext": "Configure the Motorola Android device application whitelist to exclude applications with the following characteristics:\n\n- back up MD data to non-DoD cloud servers (including user and application access to cloud backup services);\n- transmit MD diagnostic data to non-DoD servers;\n- voice assistant application if available when MD is locked;\n- voice dialing application if available when MD is locked;\n- allows synchronization of data or applications between devices associated with user;\n- payment processing; and\n- allows unencrypted (or encrypted but not FIPS 140-2 validated) data sharing with other MDs, display screens (screen mirroring), or printers.\n\nOn the MDM console: \n1. Go to the Android app catalog for managed Google Play.\n2. Before selecting an app, review the app details and privacy policy to ensure the app does not include prohibited characteristics.",
"iacontrols": null,
"id": "V-230084",
"ruleID": "SV-230084r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie whitelist must be configured to not include applications with the following characteristics: \n\n- back up MD data to non-DoD cloud servers (including user and application access to cloud backup services); \n- transmit MD diagnostic data to non-DoD servers; \n- voice assistant application if available when MD is locked; \n- voice dialing application if available when MD is locked; \n- allows synchronization of data or applications between devices associated with user; and \n- allows unencrypted (or encrypted but not FIPS 140-2 validated) data sharing with other MDs or printers.",
"version": "MOTO-09-001100"
},
"V-230085": {
"checkid": "C-32400r538251_chk",
"checktext": "Determine if the AO has approved the use of Bluetooth at the site.\n\nIf the AO has not approved the use of Bluetooth, verify Bluetooth has been disabled.\n\nOn the MDM console: \n1. Open Restrictions section.\n2. Verify \"Disallow Bluetooth\" is set.\n\nOn the Android Pie device: \n1. Go to Settings >> Connected Devices >> Connection Preferences >> Bluetooth.\n2. Verify this is set to \"Off\" and cannot be toggled to \"On\".\n\nIf the AO has approved the use of Bluetooth, on the Android Pie device: \n1. Go to Settings >> Connected Devices.\n2. Verify only approved Bluetooth-connected devices using approved profiles are listed.\n\nIf the AO has not approved the use of Bluetooth, and Bluetooth use is not disabled via an MDM managed device policy, this is a finding.\n\nIf the AO has approved the use of Bluetooth, and Bluetooth devices using unauthorized Bluetooth profiles are listed on the device under \"Connected devices\", this is a finding.",
"description": "Some Bluetooth profiles provide the capability for remote transfer of sensitive DoD data without encryption or otherwise do not meet DoD IT security policies and therefore must be disabled.\n\nSFR ID: FMT_SMF_EXT.1.1 #18h",
"fixid": "F-32378r538252_fix",
"fixtext": "Configure the Motorola Android device to disable Bluetooth or, if the AO has approved the use of Bluetooth (for example, for car hands-free use), train the user to connect to only authorized Bluetooth devices using only HSP, HFP, or SPP Bluetooth capable devices (User Based Enforcement (UBE).\n\nTo disable Bluetooth, use the following procedure.\n\nOn the MDM console: \n1. Open Restrictions section.\n2. Toggle \"Disallow Bluetooth\" to \"On\".\n\nThe user training requirement is satisfied in requirement MOTO-09-008700.",
"iacontrols": null,
"id": "V-230085",
"ruleID": "SV-230085r569708_rule",
"severity": "low",
"title": "The Motorola Android Pie must be configured to disable Bluetooth or configured via User Based Enforcement (UBE) to allow Bluetooth for only HSP (Headset Profile), HFP (HandsFree Profile), or SPP (Serial Port Profile) capable devices.",
"version": "MOTO-09-001400"
},
"V-230086": {
"checkid": "C-32401r538254_chk",
"checktext": "Review Motorola Android device settings to determine if the Motorola Android device displays (work container) notifications on the lock screen. Notifications of incoming phone calls are acceptable even when the device is locked. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Restrictions section.\n2. Open Work Managed section.\n3. Verify \"Unredacted Notifications\" is set to \"Disallow\".\n\nOn the Android Pie device: \n1. Go to Settings >> Security & location.\n2. Tap on \"Lock screen preferences\".\n3. Verify \"Hide sensitive work content\" is listed under \"When work profile is locked\".\n\nIf the MDM console device policy allows work notifications on the lock screen or the Android Pie device allows work notifications on the lock screen, this is a finding.",
"description": "Many mobile devices display notifications on the lock screen so that users can obtain relevant information in a timely manner without having to frequently unlock the phone to determine if there are new notifications. However, in many cases, these notifications can contain sensitive information. When they are available on the lock screen, an adversary can see them merely by being in close physical proximity to the device. Configuring the Motorola Android device to not send notifications to the lock screen mitigates this risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #19",
"fixid": "F-32379r538255_fix",
"fixtext": "Configure the Motorola Android device to not display (work profile) notifications when the device is locked.\n\nOn the MDM console: \n1. Open Restrictions section.\n2. Open Work Managed section.\n3. Set \"Unredacted Notifications\" to \"Disallow\".",
"iacontrols": null,
"id": "V-230086",
"ruleID": "SV-230086r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to not display the following (work profile) notifications when the device is locked: [selection:\n\n- email notifications; \n- calendar appointments; \n- contact associated with phone call notification; \n- text message notification; \n- other application-based notifications; \n- all notifications].",
"version": "MOTO-09-001600"
},
"V-230087": {
"checkid": "C-32402r538257_chk",
"checktext": "Review device configuration settings to confirm that trust agents are disabled. \n \nThis procedure is performed on both the MDM Administration console and the Motorola Android Pie device. \n \nOn the MDM console: \n1. Open Restrictions section.\n2. Set \"Disable trust agents\" to \"On\".\n\nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Security & location\". \n3. Tap \"Advanced\". \n4. Tap \"Trust agents\". \n5. Verify that all listed trust agents are disabled and cannot be enabled. \n \nIf on the MDM console \"disable trust agents\" is not selected, or on the Android Pie device a trust agent can be enabled, this is a finding.",
"description": "Trust agents allow a user to unlock a mobile device without entering a passcode when the mobile device is, for example, connected to a user-selected Bluetooth device or in a user-selected location. If compromised, this technology would allow unauthorized users to have access to DoD sensitive data. Not permitting the use of non-password authentication mechanisms forces users to use passcodes that meet DoD passcode requirements.\n\nSFR ID: FMT_SMF_EXT.1.1 #23, FIA_UAU.5.1",
"fixid": "F-32380r538258_fix",
"fixtext": "Configure Motorola Android Pie to disable trust agents. \n \nOn the MDM console: \n1. Open Lock screen restrictions section.\n2. Set \"Disable trust agents\" to on.",
"iacontrols": null,
"id": "V-230087",
"ruleID": "SV-230087r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must be configured to disable trust agents. \n \nNote: This requirement is not applicable (NA) for specific biometric authentication factors included in the product's Common Criteria evaluation.",
"version": "MOTO-09-002300"
},
"V-230088": {
"checkid": "C-32403r538260_chk",
"checktext": "Review Motorola Android device configuration settings to determine whether a developer mode is enabled.\n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Restrictions section.\n2. Verify \"Debugging Features\" is set to \"Disallow\".\n\nOn the Android Pie device: \n1. Go to Settings >> System.\n2. Verify \"Developer Options\" is not listed.\n\nIf the MDM console device policy is not set to disable developer mode, or on the Android Pie device, the device policy is not set to disable developer mode, this is a finding.",
"description": "Developer modes expose features of the Motorola Android device that are not available during standard operation. An adversary may leverage a vulnerability inherent in a developer mode to compromise the confidentiality, integrity, and availability of DoD sensitive information. Disabling developer modes mitigates this risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #26",
"fixid": "F-32381r538261_fix",
"fixtext": "Configure the Motorola Android device to disable developer modes.\n\nOn the MDM console: \n1. Open Restrictions section.\n2. Set \"Debugging Features\" to \"Disallow\".",
"iacontrols": null,
"id": "V-230088",
"ruleID": "SV-230088r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to disable developer modes.",
"version": "MOTO-09-002800"
},
"V-230089": {
"checkid": "C-32404r538263_chk",
"checktext": "The DoD warning banner can be displayed by either of the following methods (required text is found in the Vulnerability Discussion):\n\n1. By placing the DoD warning banner text in the user agreement signed by each Motorola Android device user (preferred method).\n2. By configuring the warning banner text on the MDM console and installing the banner on each managed mobile device.\n\nDetermine which method is used at the Motorola Android device site and follow the appropriate validation procedure below.\n\nValidation Procedure for Method #1: \nReview the signed user agreements for several Motorola Android device users and verify the agreement includes the required DoD warning banner text.\n\nValidation Procedure for Method #2:\nOn the MDM console, ensure \"Lock Screen Message\" is set and the appropriate banner text is included.\n\nIf, for Method #1, the required warning banner text is not on all signed user agreements reviewed, or for Method #2, the MDM console device policy is not set to display a warning banner with the appropriate designated wording or on the Android Pie device, the device policy is not set to display a warning banner with the appropriate designated wording, this is a finding.",
"description": "Android Pie is required to display the DoD-approved system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. Required banners help ensure that DoD can audit and monitor the activities of mobile device users without legal restriction.\n\nSystem use notification messages can be displayed when individuals first access or unlock the mobile device. The banner must be implemented as a \"click-through\" banner at device unlock (to the extent permitted by the operating system). A \"click-through\" banner prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating \"OK\".\n\nThe approved DoD text must be used exactly as required in the KS referenced in DoDI 8500.01. For devices accommodating banners of 1300 characters, the banner text is: \n\nYou are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. \nBy using this IS (which includes any device attached to this IS), you consent to the following conditions: \n-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. \n-At any time, the USG may inspect and seize data stored on this IS. \n-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. \n-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. \n-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.\n\nFor devices with severe character limitations, the banner text is: \n\nI've read & consent to terms in IS user agreem't.\n\nThe Administrator must configure the banner text exactly as written without any changes.\n\nSFR ID: FMT_SMF_EXT.1.1 #36",
"fixid": "F-32382r538264_fix",
"fixtext": "Configure the DoD warning banner by either of the following methods (required text is found in the Vulnerability Discussion):\n\n1. By placing the DoD warning banner text in the user agreement signed by each Motorola Android device user (preferred method).\n2. By configuring the warning banner text on the MDM console and installing the banner on each managed mobile device.\n\nOn the MDM console: \nEnable \"Lock Screen Message\" and enter the banner text.",
"iacontrols": null,
"id": "V-230089",
"ruleID": "SV-230089r569708_rule",
"severity": "low",
"title": "The Motorola Android Pie must be configured to display the DoD advisory warning message at startup or each time the user unlocks the device.",
"version": "MOTO-09-003400"
},
"V-230090": {
"checkid": "C-32405r538266_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device has a USB mass storage mode and whether it has been disabled. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Verify \"Disallow usb file transfer\" is selected.\n\nOn the Android Pie device: \n1. Plug USB cable into Android Pie device and connect to a non-DoD network-managed PC. \n2. Go to Settings >> Connected devices >> USB.\n3. Verify \"No data transfer\" is selected.\n\nIf the MDM console device policy is not set to disable USB mass storage mode, or on the Android Pie device, the device policy is not set to disable USB mass storage mode, this is a finding.",
"description": "USB mass storage mode enables the transfer of data and software from one device to another. This software can include malware. When USB mass storage is enabled on a mobile device, it becomes a potential vector for malware and unauthorized data exfiltration. Prohibiting USB mass storage mode mitigates this risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #39a",
"fixid": "F-32383r538267_fix",
"fixtext": "Configure the Motorola Android device to disable USB mass storage mode.\n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Select \"Disallow usb file transfer\".",
"iacontrols": null,
"id": "V-230090",
"ruleID": "SV-230090r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to disable USB mass storage mode.",
"version": "MOTO-09-003500"
},
"V-230091": {
"checkid": "C-32406r538269_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the capability to back up to a locally connected system has been disabled. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Verify \"Disallow usb file transfer\" is selected.\n\nOn the Android Pie device: \n1. Plug USB cable into Android Pie device and connect to a non-DoD network-managed PC. \n2. Go to Settings >> Connected devices >> USB.\n3. Verify \"No data transfer\" is selected.\n\nIf the MDM console device policy is not set to disable the capability to back up to a locally connected system, or on the Android Pie device, the device policy is not set to disable the capability to back up to a locally connected system, this is a finding.",
"description": "Data on mobile devices is protected by numerous mechanisms, including user authentication, access control, and cryptography. When the data is backed up to an external system (either locally connected or cloud-based), many if not all of these mechanisms are no longer present. This leaves the backed-up data vulnerable to attack. Disabling backup to external systems mitigates this risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #40",
"fixid": "F-32384r538270_fix",
"fixtext": "Configure the Motorola Android device to disable backup to locally connected systems.\n\nNOTE: On Restrictions, the backup features for Motorola are not in the framework.\n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Select \"Disallow usb file transfer\".",
"iacontrols": null,
"id": "V-230091",
"ruleID": "SV-230091r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to not allow backup of [all applications, configuration data] to locally connected systems.",
"version": "MOTO-09-003700"
},
"V-230092": {
"checkid": "C-32407r538272_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the capability to back up to a remote system has been disabled. \n\nThis validation procedure is performed on both the MDM Administration Console and the Android Pie device. \n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Verify \"Disallow backup service\" is not selected.\n\nOn the Android Pie device: \n1. Go to Settings >> System.\n2. Verify \"Backup\" is set to \"Off\".\n\nIf the MDM console device policy is not set to disable the capability to back up to a remote system, or on the Android Pie device, the device policy is not set to disable the capability to back up to a remote system, this is a finding.",
"description": "Backups to remote systems (including cloud backup) can leave data vulnerable to breach on the external systems, which often offer less protection than the Android device. Where the remote backup involves a cloud-based solution, the backup capability is often used to synchronize data across multiple devices. In this case, DoD devices may synchronize DoD sensitive information to a user's personal device or other unauthorized computers that are vulnerable to breach. Disallowing remote backup mitigates this risk.\n\nSFR ID: FMT_SMF_EXT.1.1 #40",
"fixid": "F-32385r538273_fix",
"fixtext": "Configure the Motorola Android device to disable backup to remote systems (including commercial clouds).\n\nNOTE: On Restrictions, data in the work profile cannot be backed up by default.\n\nOn the MDM console: \n1. Open Device Restrictions.\n2. Open Restrictions Settings.\n3. Ensure \"Enable backup service\" is not selected.",
"iacontrols": null,
"id": "V-230092",
"ruleID": "SV-230092r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to not allow backup of all applications and configuration data to remote systems.",
"version": "MOTO-09-003900"
},
"V-230093": {
"checkid": "C-32408r538275_chk",
"checktext": "Review documentation on the Motorola Android device and inspect the configuration on the Motorola Android device to verify the access control policy that prevents [selection: application processes] from accessing [selection: all] data stored by other [selection: application processes] is enabled.\n\nThis validation procedure is performed only on the MDM Administration Console. \n\nOn the MDM console: \n1. Open Restrictions settings.\n2. Open User Restrictions.\n3. Verify \"Disallow cross profile copy/paste\" is selected.\n4. Verify \"Disallow sharing data into the profile\" is selected.\n\nIf the MDM console device policy is not set to disable data sharing between profiles, this is a finding.",
"description": "App data sharing gives apps the ability to access the data of other apps for enhanced user functionality. However, sharing also poses a significant risk that unauthorized users or apps will obtain access to DoD sensitive information. To mitigate this risk, there are data sharing restrictions. If a user is allowed to make exceptions to the data sharing restriction policy, the user could enable unauthorized sharing of data, leaving it vulnerable to breach. Limiting the granting of exceptions to either the Administrator or common application developer mitigates this risk.\n\nCopy/paste of data between applications in different application processes or groups of application processes is considered an exception to the access control policy and therefore, the Administrator must be able to enable/disable the feature. Other exceptions include allowing any data or application sharing between process groups.\n\nSFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2",
"fixid": "F-32386r538276_fix",
"fixtext": "Configure the Motorola Android Pie to enable the access control policy that prevents [selection: application processes, groups of application processes] from accessing [selection: all, private] data stored by other [selection: application processes, groups of application processes].\n\nNOTE: All application data is inherently sandboxed and isolated from other applications. \n\nTo disable copy/paste on the MDM console: \n1. Open Restrictions settings.\n2. Open User Restrictions.\n3. Select \"Disallow cross profile copy/paste\".\n4. Select \"Disallow sharing data into the profile\".",
"iacontrols": null,
"id": "V-230093",
"ruleID": "SV-230093r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to disable exceptions to the access control policy that prevents application processes from accessing all data stored by other application processes.",
"version": "MOTO-09-004500"
},
"V-230095": {
"checkid": "C-32410r538281_chk",
"checktext": "Review documentation on the Motorola Android device and inspect the configuration on the Motorola Android device to enable audit logging.\n\nThis validation procedure is performed on only on the MDM Administration Console. \n\nOn the MDM console: \n1. Open the Restrictions settings.\n2. Open User settings.\n3. Select \"Enable security logging\".\n4. Select \"Enable network logging\".\n\nIf the MDM console device policy is not set to enable audit logging, this is a finding.",
"description": "Audit logs enable monitoring of security-relevant events and subsequent forensics when breaches occur. For the logs to be useful, Administrators must have the ability to view the audit logs.\n\nSFR ID: FMT_SMF_EXT.1.1 #32",
"fixid": "F-32388r538282_fix",
"fixtext": "Configure the Motorola Android Pie to enable audit logging.\n\nOn the MDM console: \n1. Open the Restrictions settings.\n2. Open User settings.\n3. Select \"Enable security logging\".\n4. Select \"Enable network logging\".",
"iacontrols": null,
"id": "V-230095",
"ruleID": "SV-230095r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie must be configured to enable audit logging.",
"version": "MOTO-09-005505"
},
"V-230096": {
"checkid": "C-32411r538284_chk",
"checktext": "Review Motorola Android device configuration settings to determine if the mobile device is configured to generate audit records for the following auditable events: detected integrity violations.\n\nThis validation procedure is performed only on the MDM Administration Console. \n\nOn the MDM console: \n1. Go to Policy management.\n2. Verify \"Security Logging\" is enabled.\n\nIf the MDM console device policy is not set to enable security logging, this is a finding.",
"description": "Audit logs enable monitoring of security-relevant events and subsequent forensics when breaches occur. They help identify attacks so that breaches can either be prevented or limited in their scope. They facilitate analysis to improve performance and security. The Requirement Statement lists key events for which the system must generate an audit record.\n\nApplication note: Requirement applies only to integrity violation detections that can be logged by the audit logging component.\n\nSFR ID: FMT_SMF_EXT.1.1 #37",
"fixid": "F-32389r538285_fix",
"fixtext": "Configure the Motorola Android device to generate audit records for the following auditable events: detected integrity violations.\n\nOn the MDM console: \n1. Go to Policy management.\n2. Enable \"Security Logging\".",
"iacontrols": null,
"id": "V-230096",
"ruleID": "SV-230096r569708_rule",
"severity": "low",
"title": "The Motorola Android Pie must be configured to generate audit records for the following auditable events: detected integrity violations.",
"version": "MOTO-09-006100"
},
"V-230097": {
"checkid": "C-32412r538287_chk",
"checktext": "Review a sample of site User Agreements for Motorola device users or similar training records and training course content. \n \nVerify that Motorola device users have completed the required training. The intent is that required training is renewed on a periodic basis in a time period determined by the AO. \n \nIf any Motorola device user has not completed the required training, this is a finding.",
"description": "The security posture of Google devices requires the device user to configure several required policy rules on their device. User-Based Enforcement (UBE) is required for these controls. In addition, if the Authorizing Official (AO) has approved the use of an unmanaged personal space, the user must receive training on risks. If a user is not aware of their responsibilities and does not comply with UBE requirements, the security posture of the mobile device may become compromised and DoD sensitive data may become compromised.\n\nSFR ID: NA",
"fixid": "F-32390r538288_fix",
"fixtext": "Have all Motorola device users complete training on the following topics. Users should acknowledge that they have reviewed training via a signed User Agreement or similar written record. \n \nTraining topics: \n \n- Operational security concerns introduced by unmanaged applications/unmanaged personal space, including applications using global positioning system (GPS) tracking. \n- Need to ensure no DoD data is saved to the personal space or transmitted from a personal app (for example, from personal email). \n- If the Purebred key management app is used, users are responsible for maintaining positive control of their credentialed device at all times. The DoD PKI certificate policy requires subscribers to maintain positive control of the devices that contain private keys and to report any loss of control so the credentials can be revoked. Upon device retirement, turn-in, or reassignment, ensure that a factory data reset is performed prior to device handoff. Follow mobility service provider decommissioning procedures as applicable. \n- How to configure the following UBE controls (users must configure the control) on the Motorola device: \n **Secure use of Calendar Alarm. \n **Local screen mirroring and Mirroring procedures (authorized/not authorized for use).\n **Do not upload DoD contacts via smart call and caller ID services. \n **Do not remove DoD intermediate and root PKI digital certificates. \n **Disable Wi-Fi Sharing. \n **Do not configure a DoD network (work) VPN profile on any third-party VPN client installed in the personal space.\n **If Bluetooth connections are approved for mobile device, types of allowed connections (for example car hands free but not Bluetooth wireless keyboard).\n- AO guidance on acceptable use and restrictions, if any, on downloading and installing personal apps and data (music, photos, etc.) in the Motorola device personal space.\n\nMotorola provides an Administrative Guide for the LEX L11 device to NIAP customers (refer to https://www.niap-ccevs.org/MMO/Product/st_vid11002-agd.pdf). The guide includes procedures for configuring Common Criteria on the Motorola Solutions, Inc. LEX L11 device.",
"iacontrols": null,
"id": "V-230097",
"ruleID": "SV-230097r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie users must complete required training.",
"version": "MOTO-09-008700"
},
"V-230098": {
"checkid": "C-32413r538290_chk",
"checktext": "Review device configuration settings to confirm Wi-Fi Sharing is disabled. \n \nMobile Hotspot must be enabled in order to enable Wi-Fi Sharing. If the Authorizing Official (AO) has not approved Mobile Hotspot, and it has been verified as disabled on the MDM console, no further action is needed. If Mobile Hotspot is being used, use the following procedure to verify Wi-Fi Sharing is disabled: \n\nOn the MDM console: \n1. Open the User restrictions setting.\n2. Verify \"Disallow config tethering\" is set to \"On\".\n\nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Networks & internet\". \n3. Verify that \"Hotspots & tethering\" is disabled. \n \nIf on the Android Pie device \"Wi-Fi sharing\" is enabled, this is a finding.",
"description": "Wi-Fi Sharing is an optional configuration of Wi-Fi Tethering/Mobile Hotspot, which allows the device to share its Wi-Fi connection with other wirelessly connected devices instead of its mobile (cellular) connection. \n \nWi-Fi Sharing grants the \"other\" device access to a corporate Wi-Fi network and may possibly bypass the network access control mechanisms. This risk can be partially mitigated by requiring the use of a preshared key for personal hotspots.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32391r538291_fix",
"fixtext": "Configure Motorola Android Pie to disable Wi-Fi Sharing. \n \nMobile Hotspot must be enabled in order to enable Wi-Fi Sharing. If the AO has not approved Mobile Hotspot, and it has been disabled on the MDM console, no further action is needed. If Mobile Hotspot is being used, use the following procedure to disable Wi-Fi Sharing: \n\nOn the MDM console: \n1. Open the User restrictions setting.\n2. Set \"Disallow config tethering\" to \"On\".",
"iacontrols": null,
"id": "V-230098",
"ruleID": "SV-230098r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must be configured to enforce that Wi-Fi Sharing is disabled.",
"version": "MOTO-09-008800"
},
"V-230099": {
"checkid": "C-32414r538293_chk",
"checktext": "Review device configuration settings to confirm that the DoD root and intermediate PKI certificates are installed. \n \nThis procedure is performed on both the MDM Administration console and the Motorola Android Pie device. \n \nThe current DoD root and intermediate PKI certificates may be obtained in self-extracting zip files at http://cyber.mil/pki-pke (for NIPRNet). \n \nOn the MDM console, verify that the DoD root and intermediate certificates are part of a device and/or work profile that is being pushed down to the devices.\n \nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Security & Location\". \n3. Tap on \"Advanced\".\n4. Tap on \"Encryption & credentials\".\n5. Tap on \"Trusted credentials\".\n6. Verify that DoD root and intermediate PKI certificates are listed under the user tab.\n \nIf on the MDM console the DoD root and intermediate certificates are not listed in a profile, or the Motorola Android Pie device does not list the DoD root and intermediate certificates under the user tab, this is a finding.",
"description": "DoD root and intermediate PKI certificates are used to verify the authenticity of PKI certificates of users and web services. If the root and intermediate certificates are not available, an adversary could falsely sign a certificate in such a way that it could not be detected. Providing access to the DoD root and intermediate PKI certificates greatly diminishes the risk of this attack.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32392r538294_fix",
"fixtext": "Configure Motorola Android Pie to install DoD root and intermediate certificates. \n \nOn the MDM console, upload DoD root and intermediate certificates as part of a device and/or work profile.\n \nThe current DoD root and intermediate PKI certificates may be obtained in self-extracting zip files at http://cyber.mil/pki-pke (for NIPRNet).",
"iacontrols": null,
"id": "V-230099",
"ruleID": "SV-230099r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must have the DoD root and intermediate PKI certificates installed.",
"version": "MOTO-09-009000"
},
"V-230100": {
"checkid": "C-32415r538296_chk",
"checktext": "Review the device configuration to confirm that the user is unable to remove DoD root and intermediate PKI certificates.\n\nOn the MDM console: \n1. Open the User restrictions setting.\n2. Verify that \"Disallow config credentials\" is set to \"On\" for the work profile.\n\nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Security & Location\". \n3. Tap on \"Advanced\".\n4. Tap on \"Encryption & credentials\".\n5. Tap on \"Trusted credentials\".\n6. Verify that the user is unable to untrust or remove any work certificates.\n \nIf on the Android Pie device the user is able to remove certificates, this is a finding.",
"description": "DoD root and intermediate PKI certificates are used to verify the authenticity of PKI certificates of users and web services. If the user is allowed to remove root and intermediate certificates, the user could allow an adversary to falsely sign a certificate in such a way that it could not be detected. Restricting the ability to remove DoD root and intermediate PKI certificates to the Administrator mitigates this risk.\n\nSFR ID: FMT_MOF_EXT.1.2 #47",
"fixid": "F-32393r538297_fix",
"fixtext": "Configure Motorola Android Pie to prevent a user from removing DoD root and intermediate PKI certificates.\n\nOn the MDM console: \n1. Open the User restrictions setting.\n2. Set \"Disallow config credentials\" to \"On\" for the work profile.",
"iacontrols": null,
"id": "V-230100",
"ruleID": "SV-230100r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must allow only the Administrator (MDM) to install/remove DoD root and intermediate PKI certificates.",
"version": "MOTO-09-009100"
},
"V-230101": {
"checkid": "C-32416r538299_chk",
"checktext": "Review the Motorola Android Pie Work Profile configuration settings to confirm that users are prevented from adding personal email accounts to the work email app. \n \nThis procedure is performed on both the MDM Administrator console and the Motorola Android Pie device. \n \nOn the MDM console: \n1. Open the User restrictions setting.\n2. Verify that \"Disallow add accounts\" is set to \"On\".\n\nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Accounts\". \n3. Verify that \"Add account\" is grayed out under the Work section.\n \nIf on the MDM console the restriction to \"Disallow add accounts\" is not set, or On the Android Pie device the user is able to add an account, this is a finding.",
"description": "If the user is able to add a personal email account (POP3, IMAP, EAS) to the work email app, it could be used to forward sensitive DoD data to unauthorized recipients. Restricting email account addition to the Administrator or restricting email account addition to whitelisted accounts mitigates this vulnerability.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32394r538300_fix",
"fixtext": "Configure the Motorola Android Pie Work Profile to prevent users from adding personal email accounts to the work email app. \n \nOn the MDM console, for the Work Profile: \n1. Open the User restrictions setting.\n2. Set \"Disallow modify accounts\" to \"On\".\n\nRefer to the MDM documentation to determine how to provision users' work email accounts for the work email app.",
"iacontrols": null,
"id": "V-230101",
"ruleID": "SV-230101r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie Work Profile must be configured to prevent users from adding personal email accounts to the work email app.",
"version": "MOTO-09-009200"
},
"V-230102": {
"checkid": "C-32417r538302_chk",
"checktext": "Review the Motorola Android Pie Work Profile configuration settings to confirm the system application disable list is enforced. This setting is enforced by default.\n \nThis procedure is performed on the MDM Administrator console. \n \nReview the system app whitelist and verify that only approved apps are on the list.\n\nIf on the MDM console the system app whitelist contains unapproved core apps, this is a finding.",
"description": "The system application disable list controls user access to/execution of all core and preinstalled applications. \n \nCore application: Any application integrated into Android Pie by Google or Motorola. \n \nPreinstalled application: Additional noncore applications included in the Android Pie build by Google, Motorola, or the wireless carrier. \n \nSome system applications can compromise DoD data or upload users' information to non-DoD-approved servers. A user must be blocked from using such applications that exhibit behavior that can result in compromise of DoD data or DoD user information. \n \nThe site Administrator must analyze all preinstalled applications on the device and disable all applications not approved for DoD use by configuring the system application disable list.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32395r538303_fix",
"fixtext": "Configure the Motorola Android Pie Work Profile to enforce the system application disable list. \n\nThe required configuration is the default configuration when the device is enrolled. If the device configuration is changed, use the following procedure to bring the device back into compliance: \n\nOn the MDM, configure a list of approved Motorola core and preinstalled apps in the core app whitelist.",
"iacontrols": null,
"id": "V-230102",
"ruleID": "SV-230102r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie work profile must be configured to enforce the system application disable list.",
"version": "MOTO-09-009400"
},
"V-230103": {
"checkid": "C-32418r538305_chk",
"checktext": "Verify that Motorola Android Pie is configured as Corporate Owned Work Managed.\n \nThis procedure is performed on both the MDM Administrator console and the Motorola Android Pie device. \n \nOn the MDM console, verify that the default enrollment is set to Corporate Owned Work Managed.\n \nOn the Android Pie device: \n1. Go to the application drawer.\n2. Verify the presence of a Personal tab and a Work tab.\n\nIf on the MDM console the default enrollment is not set to Corporate Owned Work Managed or On the Android Pie device the user does not see a Work tab, this is a finding.",
"description": "The Android Enterprise Work Profile is the designated application group for the COPE use case.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32396r538306_fix",
"fixtext": "Configure Motorola Android Pie in a Corporate Owned Work Managed configuration.\n\nOn the MDM console, configure the default enrollment as Corporate Owned Work Managed.\n\nRefer to the MDM documentation to determine how to configure the device to enroll as Corporate Owned Work Managed.",
"iacontrols": null,
"id": "V-230103",
"ruleID": "SV-230103r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must be provisioned as a fully managed device and configured to create a work profile.",
"version": "MOTO-09-009600"
},
"V-230104": {
"checkid": "C-32419r538308_chk",
"checktext": "Review Chrome Browser in the Motorola Android Pie Work Profile autofill setting.\n\nThis procedure is performed only on the MDM Administrator console. \n \nOn the MDM console, for the Work Profile: \n1. Open the Chrome Browser settings.\n2. Verify \"Enable autofill\" is set to \"Off\".\n \nIf on the MDM console autofill is set to \"On\" in the Chrome Browser settings, this is a finding.",
"description": "The autofill functionality in the web browser allows the user to complete a form that contains sensitive information, such as personally identifiable information (PII), without previous knowledge of the information. By allowing the use of autofill functionality, an adversary who learns a user's Android Pie device password, or who otherwise is able to unlock the device, may be able to further breach other systems by relying on the autofill feature to provide information unknown to the adversary. By disabling the autofill functionality, the risk of an adversary gaining further information about the device's user or compromising other systems is significantly mitigated.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32397r538309_fix",
"fixtext": "Configure Chrome Browser in Motorola Android Pie Work Profile to disable autofill.\n \nOn the MDM console, for the Work Profile: \n1. Open the Chrome Browser settings.\n2. Set \"Enable autofill\" to \"Off\".\n\nRefer to the MDM documentation to determine how to configure Chrome Browser settings.",
"iacontrols": null,
"id": "V-230104",
"ruleID": "SV-230104r569708_rule",
"severity": "medium",
"title": "The Motorola Android Pie work profile must be configured to disable automatic completion of work space internet browser text input.",
"version": "MOTO-09-009800"
},
"V-230105": {
"checkid": "C-32420r538311_chk",
"checktext": "Review the Motorola Android Pie Workspace configuration settings to confirm that autofill services are disabled. \n \nThis procedure is performed only on the MDM Administration console. \n \nOn the MDM console, for the Workspace, in the \"Android user restrictions\" group, under the work profile, verify that \"Disallow autofill\" is selected. \n \nIf on the MDM console \"Disallow autofill\" is not selected, this is a finding.",
"description": "The autofill services allow the user to complete text inputs that could contain sensitive information, such as personally identifiable information (PII), without previous knowledge of the information. By allowing the use of autofill services, an adversary who learns a user's Android Pie device password, or who otherwise is able to unlock the device, may be able to further breach other systems by relying on the autofill services to provide information unknown to the adversary. By disabling the autofill services, the risk of an adversary gaining further information about the device's user or compromising other systems is significantly mitigated. \n \nExamples of apps that offer autofill services include Samsung Pass, Google, Dashlane, LastPass, and 1Password.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32398r538312_fix",
"fixtext": "Configure Motorola Android Pie Workspace to disable the autofill services. \n \nOn the MDM console, in the Android work profile restrictions, select \"Disallow autofill\".",
"iacontrols": null,
"id": "V-230105",
"ruleID": "SV-230105r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie Work Profile must be configured to disable the autofill services.",
"version": "MOTO-09-010000"
},
"V-230106": {
"checkid": "C-32421r538314_chk",
"checktext": "Review the Motorola Android Pie Work Profile to confirm that user configuration of date and time is not allowed. \n \nThis procedure is performed on both the MDM Administration console and the Motorola Android Pie device. \n \nOn the MDM console, verify that \"Set auto (network) time required\" is set to \"On\".\n \nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"System\". \n3. Tap \"Date & times\". \n4. Verify that \"Automatic date & time\" is grayed out.\n \nIf on the MDM console \"Set auto (network) time required\" is not set to \"On\", or On the Android Pie device, \"Automatic date & time\" is grayed out, this is a finding.",
"description": "Determining the correct time a particular application event occurred on a system is critical when conducting forensic analysis and investigating system events. \n \nPeriodically synchronizing internal clocks with an authoritative time source is necessary to correctly correlate the timing of events that occur across the enterprise. The three authoritative time sources for Android Pie are an authoritative time server that is synchronized with redundant United States Naval Observatory (USNO) time servers as designated for the appropriate DoD network (NIPRNet or SIPRNet), the Global Positioning System (GPS), or the wireless carrier. \n \nTime stamps generated by the audit system in Android Pie must include both date and time. The time may be expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32399r538315_fix",
"fixtext": "Configure Motorola Android Pie Work Profile to set auto network time.\n \nOn the MDM console, in the Android user restrictions section, set \"Set auto (network) time required\" to \"On\".",
"iacontrols": null,
"id": "V-230106",
"ruleID": "SV-230106r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must be configured to disallow configuration of date and time.",
"version": "MOTO-09-010200"
},
"V-230107": {
"checkid": "C-32422r538317_chk",
"checktext": "Review the Motorola Android Pie device configuration settings to confirm that outgoing beam is disallowed. \n \nThis procedure is performed on both the MDM Administration console and the Motorola Android Pie device. \n \nOn the MDM console, in the Android user restrictions section, verify that \"Disallow outgoing beam\" is set to \"On\".\n \nOn the Android Pie device: \n1. Open Settings. \n2. Tap \"Connected devices\". \n3. Tap \"Connection preferences\". \n4. Verify that \"Android Beam\" is off and grayed out.\n \nIf on the MDM console \"Disallow outgoing beam\" is not set to \"On\", or On the Android Pie device \"Android Beam\" is not off and grayed out, this is a finding.",
"description": "Outgoing beam allows transfer of data through near field communication (NFC) and Bluetooth by touching two unlocked devices together. If it were enabled, sensitive DoD data could be transmitted. \n \nBecause of the security risks of sharing sensitive DoD data, users must not be able to allow outgoing beam.\n\nSFR ID: FMT_MOF_EXT.1.2 #47",
"fixid": "F-32400r538318_fix",
"fixtext": "Configure the Motorola Android Pie device to disallow outgoing beam. \n \nOn the MDM console, in the Android user restrictions section, set \"Disallow outgoing beam\" to \"On\".",
"iacontrols": null,
"id": "V-230107",
"ruleID": "SV-230107r569708_rule",
"severity": "medium",
"title": "Motorola Android Pie must be configured to disallow outgoing beam.",
"version": "MOTO-09-010400"
},
"V-230108": {
"checkid": "C-32423r538320_chk",
"checktext": "Review device configuration settings to confirm that the most recently released version of Motorola Android Pie is installed. \n\nFor Motorola Android Pie, LEXL11 current version: \nPIE.L11_P_30.22.01 uses latest Google Android 9.0 version (and Security Patches) as provided by Qualcomm (chipset vendor) based on Android OS 9.0. Linux Kernel version is 4.4.153.\n\nThis procedure is performed on both the MDM console and the Motorola Android Pie device. \n \nIn the MDM management console, review the version of Motorola Android Pie installed on a sample of managed devices. This procedure will vary depending on the MDM product. \n \nOn the Android Pie device, to see the installed operating system version: \n1. Open Settings. \n2. Tap \"About phone\". \n3. Verify \"Build number\". \n \nIf the installed version of the Android operating system on any reviewed Motorola devices is not the latest released by the wireless carrier, this is a finding.",
"description": "Required security features are not available in earlier operating system versions. In addition, there may be known vulnerabilities in earlier versions.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32401r538321_fix",
"fixtext": "Install the latest released version of the Motorola Android Pie operating system on all managed Motorola devices. \n\nFor Motorola Android Pie, LEXL11 current version: PIE.L11_P_30.22.01 uses latest Google Android 9.0 version (and Security Patches) as provided by Qualcomm (chipset vendor) based on Android OS 9.0. Linux Kernel version is 4.4.153.\n ",
"iacontrols": null,
"id": "V-230108",
"ruleID": "SV-230108r569708_rule",
"severity": "high",
"title": "Motorola Android Pie devices must have the latest available Motorola Android Pie operating system installed.",
"version": "MOTO-09-010800"
},
"V-230109": {
"checkid": "C-32424r538323_chk",
"checktext": "Review device configuration settings to confirm that version LEXL11 NIAP-approved build number (based on Android OS 9.0) is PIE.L11_P_R30.21.10 and Kernel version is 4.4.153. See: https://www.niap-ccevs.org/Product/Compliant.cfm?PID=11002\n \nThis procedure is performed on both the MDM console and the Motorola Android Pie device. \n \nIn the MDM management console, review the version of Motorola Android Pie installed on a sample of managed devices. \n \nOn the Android Pie device, to see the installed operating system version: \n1. Open Settings. \n2. Tap \"About phone\". \n3. Verify \"Build number\". \n \nIf the installed version of the Android operating system on any reviewed Motorola device is not the latest released by the wireless carrier, this is a finding. \n\nSee Motorola's Android operating system patch website: https://source.android.com/security/bulletin/ \n \nIf the installed version of the Android Pie operating system is not the NIAP-approved version, this is a finding.",
"description": "Required security features are not available in earlier operating system versions. In addition, there may be known vulnerabilities in earlier versions.\n\nSFR ID: FMT_SMF_EXT.1.1 #47",
"fixid": "F-32402r538324_fix",
"fixtext": "Install the latest released version of the Motorola Android Pie operating system on all managed Motorola devices. \n\nFor Motorola Android Pie, LEXL11 NIAP-approved build number (based on Android OS 9.0) is PIE.L11_P_R30.21.10, and Kernel version is 4.4.153. See: https://www.niap-ccevs.org/Product/Compliant.cfm?PID=11002\n\nLEX L11 current version: PIE.L11_P_30.22.01 is based on the LEX L11 NIAP version, with small additions. The changes are dedicated to support Verizon Wireless and AT&T carriers' requirements only.",
"iacontrols": null,
"id": "V-230109",
"ruleID": "SV-230109r569708_rule",
"severity": "high",
"title": "Motorola Android Pie devices must have a NIAP-validated Motorola Android Pie operating system installed.",
"version": "MOTO-09-010900"
}
},
"profiles": {
"MAC-1_Classified": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-1_Classified",
"title": "I - Mission Critical Classified"
},
"MAC-1_Public": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-1_Public",
"title": "I - Mission Critical Public"
},
"MAC-1_Sensitive": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-1_Sensitive",
"title": "I - Mission Critical Sensitive"
},
"MAC-2_Classified": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-2_Classified",
"title": "II - Mission Support Classified"
},
"MAC-2_Public": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-2_Public",
"title": "II - Mission Support Public"
},
"MAC-2_Sensitive": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-2_Sensitive",
"title": "II - Mission Support Sensitive"
},
"MAC-3_Classified": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-3_Classified",
"title": "III - Administrative Classified"
},
"MAC-3_Public": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-3_Public",
"title": "III - Administrative Public"
},
"MAC-3_Sensitive": {
"description": "",
"findings": {
"V-230077": "true",
"V-230078": "true",
"V-230079": "true",
"V-230080": "true",
"V-230081": "true",
"V-230082": "true",
"V-230083": "true",
"V-230084": "true",
"V-230085": "true",
"V-230086": "true",
"V-230087": "true",
"V-230088": "true",
"V-230089": "true",
"V-230090": "true",
"V-230091": "true",
"V-230092": "true",
"V-230093": "true",
"V-230095": "true",
"V-230096": "true",
"V-230097": "true",
"V-230098": "true",
"V-230099": "true",
"V-230100": "true",
"V-230101": "true",
"V-230102": "true",
"V-230103": "true",
"V-230104": "true",
"V-230105": "true",
"V-230106": "true",
"V-230107": "true",
"V-230108": "true",
"V-230109": "true"
},
"id": "MAC-3_Sensitive",
"title": "III - Administrative Sensitive"
}
},
"slug": "motorola_android_9.x_cope",
"title": "Motorola Android 9.x COPE Security Technical Implementation Guide",
"version": "1"
}
}