The MobileIron Core MDM server must be configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT

The MobileIron Core MDM server must be configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-70529	MICR-9X-102150	SV-85151r1_rule		Medium

Description
Failure to generate these audit records makes it more difficult to identify or investigate attempted or successful compromises, potentially causing incidents to last longer than necessary. SFR ID: FAU_GEN.1.1(1) Refinement

STIG	Date
MobileIron Core v9.x MDM Security Technical Implementation Guide	2019-05-06

Details

Check Text ( C-70929r1_chk )
These procedures are the same as MICR-9X-103107. They only have to be performed once. Review MobileIron Core Server documentation and configuration settings to determine if the server is configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1. Check MobileIron Core Server Common Criteria mode 1. SSH to MobileIron Core from any SSH client. 2. Enter the administrator credentials that were set up when the MobileIron Core was installed. 3. Enter "show common_criteria_mode_status". 4. The following message should appear: "Common Criteria Mode is enabled". If on the MobileIron Core server the Common Criteria Mode is not enabled, this is a finding.

Check Text ( C-70929r1_chk )

These procedures are the same as MICR-9X-103107. They only have to be performed once.

Review MobileIron Core Server documentation and configuration settings to determine if the server is configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1.

Check MobileIron Core Server Common Criteria mode
1. SSH to MobileIron Core from any SSH client.
2. Enter the administrator credentials that were set up when the MobileIron Core was installed.
3. Enter "show common_criteria_mode_status".
4. The following message should appear: "Common Criteria Mode is enabled".

If on the MobileIron Core server the Common Criteria Mode is not enabled, this is a finding.

Fix Text (F-76767r1_fix)
These procedures are the same as MICR-9X-103107. They only have to be performed once. Configure MobileIron Core Server Common Criteria mode 1. SSH to MobileIron Core from any SSH client. 2. Enter the administrator credentials you set when you installed MobileIron Core. 3. Enter "enable". 4. When prompted, enter the "enable" secret you set when you installed MobileIron Core. 5. Enter "configure terminal". 6. Enter "common_criteria_mode". 7. Enter the following command to proceed with the necessary reload: do reload The system will not be reachable until the reboot is complete.

Fix Text (F-76767r1_fix)

These procedures are the same as MICR-9X-103107. They only have to be performed once.

Configure MobileIron Core Server Common Criteria mode

1. SSH to MobileIron Core from any SSH client.
2. Enter the administrator credentials you set when you installed MobileIron Core.
3. Enter "enable".
4. When prompted, enter the "enable" secret you set when you installed MobileIron Core.
5. Enter "configure terminal".
6. Enter "common_criteria_mode".
7. Enter the following command to proceed with the necessary reload:

do reload

The system will not be reachable until the reboot is complete.