Before establishing a user session, the MobileIron Core MDM server must be configured to display an administrator-specified advisory notice and consent warning message regarding use of the MDM server.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-70521	MICR-9X-100100	SV-85143r1_rule		Low

Description
Note: The advisory notice and consent warning message is not required if the General Purpose OS or Network Device displays an advisory notice and consent warning message when the administrator logs on to the General Purpose OS or Network Device prior to accessing the MDM server or MDM Server platform. The MDM server/server platform is required to display the DoD-approved system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. This ensures the legal requirements for auditing and monitoring are met. The approved DoD text must be used as specified in KS referenced in DoDI 8500.01. The non-bracketed text below must be used without any changes as the warning banner. [A. Use this banner for desktops, laptops, and other devices accommodating banners of 1300 characters. The banner shall be implemented as a click-through banner at logon (to the extent permitted by the operating system), meaning it prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating “OK.”] You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. SFR ID: FMT_SMF_EXT.1.1(2) Refinement d.

Description

Note: The advisory notice and consent warning message is not required if the General Purpose OS or Network Device displays an advisory notice and consent warning message when the administrator logs on to the General Purpose OS or Network Device prior to accessing the MDM server or MDM Server platform. The MDM server/server platform is required to display the DoD-approved system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. This ensures the legal requirements for auditing and monitoring are met. The approved DoD text must be used as specified in KS referenced in DoDI 8500.01. The non-bracketed text below must be used without any changes as the warning banner. [A. Use this banner for desktops, laptops, and other devices accommodating banners of 1300 characters. The banner shall be implemented as a click-through banner at logon (to the extent permitted by the operating system), meaning it prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating “OK.”] You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. SFR ID: FMT_SMF_EXT.1.1(2) Refinement d.

STIG	Date
MobileIron Core v9.x MDM Security Technical Implementation Guide	2019-05-06

Details

Check Text ( C-70921r1_chk )
Review MobileIron Core Server documentation and configuration settings to determine if a warning banner is displayed upon logon and the warning banner is using the appropriate designated wording. 1. Connect to the MobileIron Core Server using SSH. 2. Type in a user name and press enter. 3. Verify the required DoD banner is displayed before the password prompt. 4. If the banner is not presented or does not have the required text, this is a finding. 1. Connect to the MobileIron Core Server system manager portal using a web browser. 2. Verify the required banner is displayed on the web page. 3. If the banner is not presented or does not have the required text, this is a finding. 1. Connect to the MobileIron Core Server administrator portal using a web browser. 2. Verify the required banner is displayed on the web page. 3. If the banner is not presented or does not have the required text, this is a finding. You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

Check Text ( C-70921r1_chk )

Review MobileIron Core Server documentation and configuration settings to determine if a warning banner is displayed upon logon and the warning banner is using the appropriate designated wording.

1. Connect to the MobileIron Core Server using SSH.
2. Type in a user name and press enter.
3. Verify the required DoD banner is displayed before the password prompt.
4. If the banner is not presented or does not have the required text, this is a finding.

1. Connect to the MobileIron Core Server system manager portal using a web browser.
2. Verify the required banner is displayed on the web page.
3. If the banner is not presented or does not have the required text, this is a finding.

1. Connect to the MobileIron Core Server administrator portal using a web browser.
2. Verify the required banner is displayed on the web page.
3. If the banner is not presented or does not have the required text, this is a finding.

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

Fix Text (F-76759r1_fix)
Configure the MobileIron Core Server to display the appropriate warning banner text. 1. Login to the MobileIron Core Server administrator portal as a user with the security configuration administrator role using a web browser. 2. Select "Settings" on the web page. 3. Select "General "on the web page. 4. Select "Login" on the web page. 5. Check the "Enable Login Text Box" on the web page. 6. Type the required banner text in the "Text to Display" dialog on the web page. 7. Select "Save" on the web page. You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

Fix Text (F-76759r1_fix)

Configure the MobileIron Core Server to display the appropriate warning banner text.

1. Login to the MobileIron Core Server administrator portal as a user with the security configuration administrator role using a web browser.
2. Select "Settings" on the web page.
3. Select "General "on the web page.
4. Select "Login" on the web page.
5. Check the "Enable Login Text Box" on the web page.
6. Type the required banner text in the "Text to Display" dialog on the web page.
7. Select "Save" on the web page.

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.