UCF STIG Viewer Logo

The mobile device system administrator must perform a wipe command on all new or reissued mobile devices and a STIG-compliant IT policy will be pushed to the device before issuing it to DoD personnel.


Overview

Finding ID Version Rule ID IA Controls Severity
V-24963 WIR-SPP-008-01 SV-30700r6_rule Low
Description
Malware can be installed on the device at some point between shipping from the factory and delivery to DoD. The malware could result in the compromise of sensitive DoD information or result in the introduction of malware within the DoD network.
STIG Date
Mobile Device Policy Security Technical Implementation Guide (STIG) 2019-05-21

Details

Check Text ( C-31126r8_chk )
Detailed Policy Requirements:
The mobile device system administrator must perform a wipe command on all new or reissued mobile devices, reload system software, and load a STIG-compliant security policy on the mobile device before issuing it to DoD personnel and placing the device on a DoD network. The intent is to return the device to the factory state before the DoD software baseline is installed.

When wireless over-the-air (OTA) activation is performed, the activation password is passed to the user in a secure manner (e.g., activation password is encrypted and emailed to an individual).

Check Procedures:
Interview the ISSO. Verify required procedures are followed. If required procedures were not followed, this is a finding.
Fix Text (F-27597r4_fix)
Perform a wipe command on all new or reissued mobile devices.