The Windows DNS Server must verify the correct operation of security functions upon startup and/or restart, upon command by a user with privileged access, and/or every 30 days.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-259406	WDNS-22-000078	SV-259406r961734_rule		Medium

Description
Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes but is not limited to establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Without verification, security functions may not operate correctly, and this failure may go unnoticed. Notifications provided by information systems include, for example, electronic alerts to system administrators, messages to local computer consoles, and/or hardware indications, such as lights. The DNS server should perform self-tests, such as at server startup, to confirm that its security functions are working properly.

Description

Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes but is not limited to establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Without verification, security functions may not operate correctly, and this failure may go unnoticed. Notifications provided by information systems include, for example, electronic alerts to system administrators, messages to local computer consoles, and/or hardware indications, such as lights. The DNS server should perform self-tests, such as at server startup, to confirm that its security functions are working properly.

STIG	Date
Microsoft Windows Server Domain Name System (DNS) Security Technical Implementation Guide	2024-06-14

Details

Check Text ( C-63145r945354_chk )
Note: This requirement applies to any Windows DNS Server that hosts non-Active Directory (AD)-integrated zones even if the DNS servers host AD-integrated zones, too. If the Windows DNS Server hosts only AD-integrated zones and does not host any file-based zones, this is not applicable. Validate this check from the Windows DNS Server being configured/reviewed. Log on to the DNS server using the Domain Admin or Enterprise Admin account or Local Administrator account. Determine a valid host in the zone. Open the Windows PowerShell prompt on the Windows DNS Server being configured/reviewed. Issue the following command: (Replace www.zonename.mil with a FQDN of a valid host in the zone being validated. Replace ###.###.###.### with the FQDN or IP address of the Windows DNS Server hosting the signed zone.) resolve-dnsname www.zonename.mil -server ###.###.###.### -dnssecok Note: It is important to use the -server switch followed by the DNS server name/IP address. The result should show the "A" record results. In addition, the results should show QueryType: RRSIG with an expiration, date signed, signer, and signature, similar to the following: Name: www.zonename.mil QueryType: RRSIG TTL: 189 Section: Answer TypeCovered: CNAME Algorithm: 8 LabelCount: 3 OriginalTtl: 300 Expiration: 11/21/2022 10:22:28 AM Signed: 10/22/2022 10:22:28 AM Signer: zonename.mil Signature: {87, 232, 34, 134...} Name: origin-www.zonename.mil QueryType: A TTL: 201 Section: Answer IP4Address: ###.###.###.### If the results do not show the RRSIG and signature information, this is a finding.

Check Text ( C-63145r945354_chk )

Note: This requirement applies to any Windows DNS Server that hosts non-Active Directory (AD)-integrated zones even if the DNS servers host AD-integrated zones, too. If the Windows DNS Server hosts only AD-integrated zones and does not host any file-based zones, this is not applicable.

Validate this check from the Windows DNS Server being configured/reviewed.

Log on to the DNS server using the Domain Admin or Enterprise Admin account or Local Administrator account.

Determine a valid host in the zone.

Open the Windows PowerShell prompt on the Windows DNS Server being configured/reviewed.

Issue the following command:
(Replace www.zonename.mil with a FQDN of a valid host in the zone being validated. Replace ###.###.###.### with the FQDN or IP address of the Windows DNS Server hosting the signed zone.)

resolve-dnsname www.zonename.mil -server ###.###.###.### -dnssecok

Note: It is important to use the -server switch followed by the DNS server name/IP address.

The result should show the "A" record results.

In addition, the results should show QueryType: RRSIG with an expiration, date signed, signer, and signature, similar to the following:

Name: www.zonename.mil
QueryType: RRSIG
TTL: 189
Section: Answer
TypeCovered: CNAME
Algorithm: 8
LabelCount: 3
OriginalTtl: 300
Expiration: 11/21/2022 10:22:28 AM
Signed: 10/22/2022 10:22:28 AM
Signer: zonename.mil
Signature: {87, 232, 34, 134...}

Name: origin-www.zonename.mil
QueryType: A
TTL: 201
Section: Answer
IP4Address: ###.###.###.###

If the results do not show the RRSIG and signature information, this is a finding.

Fix Text (F-63053r939922_fix)
Sign or re-sign the hosted zone(s) on the DNS server being validated. Log on to the DNS server using the Domain Admin or Enterprise Admin account or Local Administrator account. Press the Windows key + R and execute "dnsmgmt.msc". On the opened DNS Manager snap-in from the left pane, expand the server name for the DNS server and then expand "Forward Lookup Zones". From the expanded list, right-click to select the zone (repeat for each hosted zone), point to DNSSEC, and then click "Sign the Zone" using either approved saved parameters or approved custom parameters.

Fix Text (F-63053r939922_fix)

Sign or re-sign the hosted zone(s) on the DNS server being validated.

Log on to the DNS server using the Domain Admin or Enterprise Admin account or Local Administrator account.

Press the Windows key + R and execute "dnsmgmt.msc".

On the opened DNS Manager snap-in from the left pane, expand the server name for the DNS server and then expand "Forward Lookup Zones".

From the expanded list, right-click to select the zone (repeat for each hosted zone), point to DNSSEC, and then click "Sign the Zone" using either approved saved parameters or approved custom parameters.