The Windows Firewall with Advanced Security must be enabled when connected to a public network.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-241991	WNFWA-000003	SV-241991r698214_rule		Medium

Description
A firewall provides a line of defense against attack. To be effective, it must be enabled and properly configured. This setting enables the firewall when connected to a public network.

STIG	Date
Microsoft Windows Firewall with Advanced Security Security Technical Implementation Guide	2021-10-15

Details

Check Text ( C-45266r698212_chk )
If the following policy-based registry value exists and is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\WindowsFirewall\PublicProfile\ Value Name: EnableFirewall Type: REG_DWORD Value: 0x00000001 (1) If the policy-based registry value does not exist, verify the following registry value. If it is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\ Value Name: EnableFirewall Type: REG_DWORD Value: 0x00000001 (1)

Check Text ( C-45266r698212_chk )

If the following policy-based registry value exists and is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\WindowsFirewall\PublicProfile\

Value Name: EnableFirewall

Type: REG_DWORD
Value: 0x00000001 (1)

If the policy-based registry value does not exist, verify the following registry value. If it is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\

Value Name: EnableFirewall

Type: REG_DWORD
Value: 0x00000001 (1)

Fix Text (F-45225r698213_fix)
The preferred method of configuring the firewall settings is with a policy, particularly in a domain environment. Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Windows Firewall with Advanced Security -> Windows Firewall with Advanced Security -> Windows Firewall Properties (this link will be in the right pane) -> Public Profile Tab -> State, "Firewall state" to "On (recommended)". In addition to using policies, systems may also be configured using the firewall GUI or Netsh commands. These methods may be more appropriate for standalone systems. The configuration settings in the GUI are the same as those specified in the policy above. Windows Firewall Properties will be a link in the center pane after opening Windows Firewall with Advanced Security. The following Netsh commands may also be used to configure this setting: "Netsh advfirewall set publicprofile state on". Or "Netsh advfirewall set allprofiles state on".

Fix Text (F-45225r698213_fix)

The preferred method of configuring the firewall settings is with a policy, particularly in a domain environment.

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Windows Firewall with Advanced Security -> Windows Firewall with Advanced Security -> Windows Firewall Properties (this link will be in the right pane) -> Public Profile Tab -> State, "Firewall state" to "On (recommended)".

In addition to using policies, systems may also be configured using the firewall GUI or Netsh commands. These methods may be more appropriate for standalone systems.
The configuration settings in the GUI are the same as those specified in the policy above. Windows Firewall Properties will be a link in the center pane after opening Windows Firewall with Advanced Security.

The following Netsh commands may also be used to configure this setting:
"Netsh advfirewall set publicprofile state on".
Or
"Netsh advfirewall set allprofiles state on".