The Windows 2012 DNS Server must only allow the use of an approved DoD PKI-established certificate authorities for verification of the establishment of protected transactions.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-58691	WDNS-SC-000022	SV-73121r3_rule		Medium

Description
Untrusted Certificate Authorities (CA) can issue certificates, but they may be issued by organizations or individuals that seek to compromise DoD systems or by organizations with insufficient security controls. If the CA used for verifying the certificate is not a DoD-approved CA, trust of this CA has not been established. The DoD will only accept PKI certificates obtained from a DoD-approved internal or external certificate authority. Reliance on CAs for the establishment of secure sessions includes, for example, the use of SSL/TLS certificates. TSIG and SIG(0) are not configurable in Windows 2012 DNS Server. To meet the requirement for authentication between Windows DNS servers, IPsec must be implemented between the Windows DNS servers. NOTE: If multiple certificates from the same CA are present on the DNS server, IPsec authentication might fail due to an incorrect certificate being chosen. For this purpose, an Active Directory Certificate Services (AD CS) role must be installed and configured as an Enterprise certification authority (CA). Refer to the U_Windows_Domain_Name_Service_2012_Overview.pdf for references on deploying certificates for this procedure.

Description

Untrusted Certificate Authorities (CA) can issue certificates, but they may be issued by organizations or individuals that seek to compromise DoD systems or by organizations with insufficient security controls. If the CA used for verifying the certificate is not a DoD-approved CA, trust of this CA has not been established. The DoD will only accept PKI certificates obtained from a DoD-approved internal or external certificate authority. Reliance on CAs for the establishment of secure sessions includes, for example, the use of SSL/TLS certificates. TSIG and SIG(0) are not configurable in Windows 2012 DNS Server. To meet the requirement for authentication between Windows DNS servers, IPsec must be implemented between the Windows DNS servers. NOTE: If multiple certificates from the same CA are present on the DNS server, IPsec authentication might fail due to an incorrect certificate being chosen. For this purpose, an Active Directory Certificate Services (AD CS) role must be installed and configured as an Enterprise certification authority (CA). Refer to the U_Windows_Domain_Name_Service_2012_Overview.pdf for references on deploying certificates for this procedure.

STIG	Date
Microsoft Windows 2012 Server Domain Name System Security Technical Implementation Guide	2017-04-06

Details

Check Text ( C-59563r2_chk )
NOTE: This requirement applies to any Windows 2012 DNS Servers which host non-AD-integrated zones even if the DNS servers host AD-integrated zones, too. If the Windows 2012 DNS Servers only host AD-integrated zones, this requirement is not applicable. Log on to the DNS server which hosts non-AD-integrated zones using the Domain Admin or Enterprise Admin account. Press Windows Key + R, execute gpme.msc to open the Group Policy Management feature. In the Browse for Group Policy Object dialog box, double-click Domain Controllers.domain.com. Click Default Domain Controllers Policy and click OK. In the console tree, open Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP. Click Connection Security Rules. Consult with the SA to determine which Rules meet the intent of DNSSEC server-to-server authentication. Double-click on each Rule to verify the following: For the "Authentication:" tab, click on the "Customize..." button. On the Authentication tab, verify "Authentication mode:" is set to "Request authentication for inbound and outbound connections". Confirm the "Signing Algorithm" is set to "RSA (default)". Under "Method", ensure the "Advanced:" radio button is selected. Click on the "Customize" button. For "First authentication methods:", double-click on the entry. Verify the "Select the credential to use for first authentication:" has "Computer certificate from this certification authority (CA):" radio button selected. Review the certificate specified and verify the certificate used was generated by the internally-managed server performing the Active Directory Certificate Services (AD CS) role. If the certificate used does not meet the requirements, this is a finding.

Check Text ( C-59563r2_chk )

NOTE: This requirement applies to any Windows 2012 DNS Servers which host non-AD-integrated zones even if the DNS servers host AD-integrated zones, too.

If the Windows 2012 DNS Servers only host AD-integrated zones, this requirement is not applicable.

Log on to the DNS server which hosts non-AD-integrated zones using the Domain Admin or Enterprise Admin account.

Press Windows Key + R, execute gpme.msc to open the Group Policy Management feature.

In the Browse for Group Policy Object dialog box, double-click Domain Controllers.domain.com.

Click Default Domain Controllers Policy and click OK.

In the console tree, open Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP.

Click Connection Security Rules.

Consult with the SA to determine which Rules meet the intent of DNSSEC server-to-server authentication.

Double-click on each Rule to verify the following:
For the "Authentication:" tab, click on the "Customize..." button.

On the Authentication tab, verify "Authentication mode:" is set to "Request authentication for inbound and outbound connections".

Confirm the "Signing Algorithm" is set to "RSA (default)".

Under "Method", ensure the "Advanced:" radio button is selected. Click on the "Customize" button.

For "First authentication methods:", double-click on the entry.

Verify the "Select the credential to use for first authentication:" has "Computer certificate from this certification authority (CA):" radio button selected.

Review the certificate specified and verify the certificate used was generated by the internally-managed server performing the Active Directory Certificate Services (AD CS) role.

If the certificate used does not meet the requirements, this is a finding.

Fix Text (F-64075r1_fix)
Complete the following procedures twice for each pair of name servers. First create a rule for UDP connections, and then create a rule for TCP connections. Refer to the U_Windows_Domain_Name_Service_2012_Overview.pdf for Microsoft links for this procedure. Log on to the DNS server using the Domain Admin or Enterprise Admin account. Press Windows Key + R, execute gpme.msc to open the Group Policy Management feature. In the Browse for Group Policy Object dialog box, double-click Domain Controllers.domain.com. Click Default Domain Controllers Policy and click OK. In the console tree, open Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP. Right-Click Connection Security Rules and select New. For Rule Type, select the "Server-to-server" radio button, click Next. For Endpoint 1 and Endpoint 2, select "These IP addresses:" and add the IP addresses of all DNS servers, click Next. For Requirements, select "Request authentication for inbound and outbound connections", click Next. For Authentication Method, select Computer certificate and from the "Signing Algorithm:" drop-down, select "RSA (default)". From the "Certificate store type:" drop-down, select "Root CA (default). From the "CA name:", click Browse and select the certificate generated by the internally-managed server performing the Active Directory Certificate Services (AD CS) role, click Next. On Profile, accept default selections, click Next. On Name, enter a name applicable to the rule's function (i.e., DNSSEC UDP), click Finish.

Fix Text (F-64075r1_fix)

Complete the following procedures twice for each pair of name servers.

First create a rule for UDP connections, and then create a rule for TCP connections.

Refer to the U_Windows_Domain_Name_Service_2012_Overview.pdf for Microsoft links for this procedure.

Log on to the DNS server using the Domain Admin or Enterprise Admin account.

Press Windows Key + R, execute gpme.msc to open the Group Policy Management feature.

In the Browse for Group Policy Object dialog box, double-click Domain Controllers.domain.com.

Click Default Domain Controllers Policy and click OK.

In the console tree, open Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP.

Right-Click Connection Security Rules and select New.

For Rule Type, select the "Server-to-server" radio button, click Next.

For Endpoint 1 and Endpoint 2, select "These IP addresses:" and add the IP addresses of all DNS servers, click Next.

For Requirements, select "Request authentication for inbound and outbound connections", click Next.

For Authentication Method, select Computer certificate and from the "Signing Algorithm:" drop-down, select "RSA (default)".

From the "Certificate store type:" drop-down, select "Root CA (default).

From the "CA name:", click Browse and select the certificate generated by the internally-managed server performing the Active Directory Certificate Services (AD CS) role, click Next.

On Profile, accept default selections, click Next.

On Name, enter a name applicable to the rule's function (i.e., DNSSEC UDP), click Finish.