The Windows 2012 DNS Server must protect the integrity of transmitted information.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-58701	WDNS-SC-000028	SV-73131r3_rule		Medium

Description
Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. Confidentiality is not an objective of DNS, but integrity is. DNSSEC and TSIG/SIG(0) both digitally sign DNS information to authenticate its source and ensure its integrity.

Description

Without protection of the transmitted information, confidentiality and integrity may be compromised since unprotected communications can be intercepted and either read or altered. Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. Confidentiality is not an objective of DNS, but integrity is. DNSSEC and TSIG/SIG(0) both digitally sign DNS information to authenticate its source and ensure its integrity.

STIG	Date
Microsoft Windows 2012 Server Domain Name System Security Technical Implementation Guide	2016-06-30

Details

Check Text ( C-59573r2_chk )
Validate this check from either a Windows 8 client or a Windows 2008 or higher server, authenticated as a Domain Administrator. Determine a valid host in the zone. Open the Windows PowerShell prompt on the Windows 8/Windows 2008 or higher client. Issue the following command: (Replace www.zonename.mil with a FQDN of a valid host in the zone being validated. Replace ###.###.###.### with the FQDN or IP address of the Windows 2012 DNS Server hosting the signed zone.) resolve-dnsname www.zonename.mil -server ###.###.###.### -dnssecok NOTE: It is important to use the -server switch followed by the DNS Server name/IP address. The result should show the "A" record results. In addition, the results should show QueryType: RRSIG with an expiration, date signed, signer and signature, similar to the following: Name: www.zonename.mil QueryType: RRSIG TTL: 189 Section: Answer TypeCovered: CNAME Algorithm: 8 LabelCount: 3 OriginalTtl: 300 Expiration: 11/21/2014 10:22:28 PM Signed 10/22/2014 10:22:28 PM Signer: zonename.mil Signature: {87, 232, 34, 134...} Name: origin-www.zonename.mil QueryType: A TTL: 201 Section: Answer IP4Address: ###.###.###.### If the results do not show the RRSIG and signature information, this is a finding.

Check Text ( C-59573r2_chk )

Validate this check from either a Windows 8 client or a Windows 2008 or higher server, authenticated as a Domain Administrator.

Determine a valid host in the zone.

Open the Windows PowerShell prompt on the Windows 8/Windows 2008 or higher client.

Issue the following command:
(Replace www.zonename.mil with a FQDN of a valid host in the zone being validated. Replace ###.###.###.### with the FQDN or IP address of the Windows 2012 DNS Server hosting the signed zone.)

resolve-dnsname www.zonename.mil -server ###.###.###.### -dnssecok

NOTE: It is important to use the -server switch followed by the DNS Server name/IP address.

The result should show the "A" record results.

In addition, the results should show QueryType: RRSIG with an expiration, date signed, signer and signature, similar to the following:

Name: www.zonename.mil
QueryType: RRSIG
TTL: 189
Section: Answer
TypeCovered: CNAME
Algorithm: 8
LabelCount: 3
OriginalTtl: 300
Expiration: 11/21/2014 10:22:28 PM
Signed 10/22/2014 10:22:28 PM
Signer: zonename.mil
Signature: {87, 232, 34, 134...}

Name: origin-www.zonename.mil
QueryType: A
TTL: 201
Section: Answer
IP4Address: ###.###.###.###

If the results do not show the RRSIG and signature information, this is a finding.

Fix Text (F-64085r1_fix)
Sign, or re-sign, the hosted zone(s) on the DNS server being validated. Log on to the DNS server using the Domain Admin or Enterprise Admin account. Press Windows Key + R, execute dnsmgmt.msc. On the opened DNS Manager snap-in from the left pane, expand the server name for the DNS server, and then expand Forward Lookup Zones. From the expanded list, right-click to select the zone (repeat for each hosted zone), point to DNSSEC, and then click Sign the Zone, either using approved saved parameters or approved custom parameters.

Fix Text (F-64085r1_fix)

Sign, or re-sign, the hosted zone(s) on the DNS server being validated.
Log on to the DNS server using the Domain Admin or Enterprise Admin account.

Press Windows Key + R, execute dnsmgmt.msc.

On the opened DNS Manager snap-in from the left pane, expand the server name for the DNS server, and then expand Forward Lookup Zones.

From the expanded list, right-click to select the zone (repeat for each hosted zone), point to DNSSEC, and then click Sign the Zone, either using approved saved parameters or approved custom parameters.