Exchange receive connectors must control the number of recipients per message.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-259680	EX19-MB-000127	SV-259680r961155_rule		Low

Description
Email system availability depends in part on best practice strategies for setting tuning configurations. This configuration controls the maximum number of recipients who will receive a copy of a message at one time. This tunable value is related to throughput capacity and can enable the ability to optimize message delivery. Note: There are two types of default Receive connectors: Client Servername: Accepts SMTP connections from all non-MAPI clients, such as POP and IMAP. As POP and IMAP are not authorized for use in DOD, these should not be present. Their default value for "MaxRecipientsPerMessage" is "200". Default Servername: Accepts connections from other Hub Transport servers and any Edge Transport servers. Their default value for "MaxRecipientsPerMessage" is "5000".

Description

Email system availability depends in part on best practice strategies for setting tuning configurations. This configuration controls the maximum number of recipients who will receive a copy of a message at one time. This tunable value is related to throughput capacity and can enable the ability to optimize message delivery. Note: There are two types of default Receive connectors: Client Servername: Accepts SMTP connections from all non-MAPI clients, such as POP and IMAP. As POP and IMAP are not authorized for use in DOD, these should not be present. Their default value for "MaxRecipientsPerMessage" is "200". Default Servername: Accepts connections from other Hub Transport servers and any Edge Transport servers. Their default value for "MaxRecipientsPerMessage" is "5000".

STIG	Date
Microsoft Exchange 2019 Mailbox Server Security Technical Implementation Guide	2024-06-10

Details

Check Text ( C-63419r942352_chk )
Note: This requirement applies to IMAP4. IMAP Secure is not restricted and does not apply to this requirement. Review the Email Domain Security Plan (EDSP) or document that contains this information. Determine the Maximum Recipients per Message value. Open the Exchange Management Shell and enter the following command: Get-ReceiveConnector \| Select-Object -Property Name, Identity, MaxRecipientsPerMessage For each Receive connector, evaluate the "MaxRecipientsPerMessage" value. For each Receive connector, if the value of "MaxRecipientsPerMessage" is not set to "5000", this is a finding. or If the value of "MaxRecipientsPerMessage" is set to a value other than "5000" and has signoff and risk acceptance in the EDSP, this is not a finding.

Check Text ( C-63419r942352_chk )

Note: This requirement applies to IMAP4. IMAP Secure is not restricted and does not apply to this requirement.

Review the Email Domain Security Plan (EDSP) or document that contains this information.

Determine the Maximum Recipients per Message value.

Open the Exchange Management Shell and enter the following command:

Get-ReceiveConnector | Select-Object -Property Name, Identity, MaxRecipientsPerMessage

For each Receive connector, evaluate the "MaxRecipientsPerMessage" value.

For each Receive connector, if the value of "MaxRecipientsPerMessage" is not set to "5000", this is a finding.

or

If the value of "MaxRecipientsPerMessage" is set to a value other than "5000" and has signoff and risk acceptance in the EDSP, this is not a finding.

Fix Text (F-63327r942353_fix)
Update the EDSP to specify the "MaxRecipientsPerMessage" value or verify that this information is documented by the organization. Open the Exchange Management Shell and enter the following command: Set-ReceiveConnector -Identity <'IdentityName'> -MaxRecipientsPerMessage 5000 Note: The value must be in quotes. or Enter the value as identified by the EDSP that has obtained a signoff with risk acceptance. Repeat the procedure for each Receive connector.

Fix Text (F-63327r942353_fix)

Update the EDSP to specify the "MaxRecipientsPerMessage" value or verify that this information is documented by the organization.

Open the Exchange Management Shell and enter the following command:

Set-ReceiveConnector -Identity <'IdentityName'> -MaxRecipientsPerMessage 5000

Note: The value must be in quotes.

or

Enter the value as identified by the EDSP that has obtained a signoff with risk acceptance.

Repeat the procedure for each Receive connector.