Exchange Internet-facing Send connectors must specify a Smart Host.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-228374	EX16-MB-000210	SV-228374r879633_rule		Medium

Description
When identifying a "Smart Host" for the email environment, a logical Send connector is the preferred method. A Smart Host acts as an Internet-facing concentrator for other email servers. Appropriate hardening can be applied to the Smart Host, rather than at multiple locations throughout the enterprise. Failure to identify a Smart Host could default to each email server performing its own lookups (potentially through protective firewalls). Exchange servers should not be Internet facing and should therefore not perform any Smart Host functions. When the Exchange servers are Internet facing, they must be configured to identify the Internet-facing server that is performing the Smart Host function.

Description

When identifying a "Smart Host" for the email environment, a logical Send connector is the preferred method. A Smart Host acts as an Internet-facing concentrator for other email servers. Appropriate hardening can be applied to the Smart Host, rather than at multiple locations throughout the enterprise. Failure to identify a Smart Host could default to each email server performing its own lookups (potentially through protective firewalls). Exchange servers should not be Internet facing and should therefore not perform any Smart Host functions. When the Exchange servers are Internet facing, they must be configured to identify the Internet-facing server that is performing the Smart Host function.

STIG	Date
Microsoft Exchange 2016 Mailbox Server Security Technical Implementation Guide	2023-09-13

Details

Check Text ( C-30607r496918_chk )
Open the Exchange Management Shell and enter the following command: Get-SendConnector \| Select Name, Identity, SmartHosts Identify the Internet-facing connectors. For each Send connector, if the value of "SmartHosts" does not return the Smart Host IP address, this is a finding.

Fix Text (F-30592r496919_fix)
Open the Exchange Management Shell and enter the following command: Set-SendConnector -Identity <'IdentityName'> -SmartHosts <'IP Address of Smart Host'> -DNSRoutingEnabled $false Note: The and values must be in single quotes. Repeat the procedure for each Send connector.