Exchange Outbound Connection Timeout must be 10 minutes or less.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-221220	EX16-ED-000190	SV-221220r612603_rule		Medium

Description
Email system availability depends in part on best practice strategies for setting tuning configurations. This configuration controls the number of idle minutes before the connection is dropped. It works in conjunction with the Maximum Outbound Connections Count setting. Connections, once established, may incur delays in message transfer. The default of 10 minutes is a reasonable window in which to resume activities without maintaining idle connections for excessive intervals. If the timeout period is too long, idle connections may be maintained for unnecessarily long time periods, preventing new connections from being established. Sluggish connectivity increases the risk of lost data. A value of 10 or less is optimal.

Description

Email system availability depends in part on best practice strategies for setting tuning configurations. This configuration controls the number of idle minutes before the connection is dropped. It works in conjunction with the Maximum Outbound Connections Count setting. Connections, once established, may incur delays in message transfer. The default of 10 minutes is a reasonable window in which to resume activities without maintaining idle connections for excessive intervals. If the timeout period is too long, idle connections may be maintained for unnecessarily long time periods, preventing new connections from being established. Sluggish connectivity increases the risk of lost data. A value of 10 or less is optimal.

STIG	Date
Microsoft Exchange 2016 Edge Transport Server Security Technical Implementation Guide	2020-12-10

Details

Check Text ( C-22935r411786_chk )
Review the Email Domain Security Plan (EDSP). Determine the Connection Timeout value. Open the Exchange Management Shell and enter the following command: Get-SendConnector \| Select Name, Identity, ConnectionInactivityTimeOut For each send connector, if the value of "ConnectionInactivityTimeOut" is not set to "00:10:00", this is a finding. or If "ConnectionInactivityTimeOut" is set to other than "00:10:00" and has signoff and risk acceptance in the EDSP, this is not a finding.

Check Text ( C-22935r411786_chk )

Review the Email Domain Security Plan (EDSP).

Determine the Connection Timeout value.

Open the Exchange Management Shell and enter the following command:

Get-SendConnector | Select Name, Identity, ConnectionInactivityTimeOut

For each send connector, if the value of "ConnectionInactivityTimeOut" is not set to "00:10:00", this is a finding.

or

If "ConnectionInactivityTimeOut" is set to other than "00:10:00" and has signoff and risk acceptance in the EDSP, this is not a finding.

Fix Text (F-22924r411787_fix)
Update the EDSP to reflect the Connection Timeout value. Open the Exchange Management Shell and enter the following command: Set-SendConnector -Identity <'IdentityName'> -ConnectionInactivityTimeOut 00:10:00 Note: The value must be in single quotes. or The value as identified by the EDSP that has obtained a signoff with risk acceptance. Repeat the procedure for each send connector.