For local logging, the Juniper SRX Services Gateway must generate a message to the system management console when a log processing failure occurs.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-229022	JUSX-DM-000060	SV-229022r997560_rule		Low

Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process logs as required. Without this alert, the security personnel may be unaware of an impending failure of the log capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages at information technology speed (i.e., the time from event detection to alert occurs in seconds or less). Automated alerts can be conveyed in a variety of ways, including, for example, telephonically, via electronic mail, via text message, or via websites. Log processing failures include software/hardware errors, failures in the log capturing mechanisms, and log storage capacity being reached or exceeded. While this requirement also applies to the event monitoring system (e.g., Syslog, Security Information and Event Management [SIEM], or SNMP servers), the Juniper SRX must also be configured to generate a message to the administrator console. Syslog and SNMP trap events with a facility of "daemon" pertain to errors encountered by system processes.

Description

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process logs as required. Without this alert, the security personnel may be unaware of an impending failure of the log capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages at information technology speed (i.e., the time from event detection to alert occurs in seconds or less). Automated alerts can be conveyed in a variety of ways, including, for example, telephonically, via electronic mail, via text message, or via websites. Log processing failures include software/hardware errors, failures in the log capturing mechanisms, and log storage capacity being reached or exceeded. While this requirement also applies to the event monitoring system (e.g., Syslog, Security Information and Event Management [SIEM], or SNMP servers), the Juniper SRX must also be configured to generate a message to the administrator console. Syslog and SNMP trap events with a facility of "daemon" pertain to errors encountered by system processes.

STIG	Date
Juniper SRX SG NDM Security Technical Implementation Guide	2024-06-10

Details

Check Text ( C-31337r518242_chk )
Verify the system Syslog has been configured to display an alert on the console for the emergency and alert levels of the daemon facility. [edit] show system syslog If the system is not configured to generate a message to the system management console when a log processing failure occurs, this is a finding.

Fix Text (F-31314r518243_fix)
The following commands configure syslog to immediately display any emergency level or daemon alert events to the management console. The message will display on any currently logged on administrator's console. [edit] set system syslog user * any emergency set system syslog user * daemon alert set system syslog user * daemon critical