The Juniper SRX Services Gateway must limit the number of concurrent sessions to a maximum of 10 or less for remote access using SSH.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-66549	JUSX-DM-000001	SV-81039r1_rule		Low

Description
The connection-limit command limits the total number of concurrent SSH sessions. To help thwart brute force authentication attacks, the connection limit should be as restrictive as operationally practical Juniper Networks recommends the best practice of setting 10 (or less) for the connection-limit. This configuration will permit up to 10 users to log in to the device simultaneously, but an attempt to log an 11th user into the device will fail. The attempt will remain in a waiting state until a session is terminated and made available.

Description

The connection-limit command limits the total number of concurrent SSH sessions. To help thwart brute force authentication attacks, the connection limit should be as restrictive as operationally practical Juniper Networks recommends the best practice of setting 10 (or less) for the connection-limit. This configuration will permit up to 10 users to log in to the device simultaneously, but an attempt to log an 11th user into the device will fail. The attempt will remain in a waiting state until a session is terminated and made available.

STIG	Date
Juniper SRX SG NDM Security Technical Implementation Guide	2019-06-28

Details

Check Text ( C-67195r1_chk )
Verify the Juniper SRX sets a connection-limit for the SSH protocol. Show system services ssh If the SSH connection-limit is not set to 10 or less, this is a finding.

Fix Text (F-72625r1_fix)
Configure the SSH protocol to limit connection and sessions per connection. [edit] set system services ssh connection-limit 10 set system services ssh max-sessions-per-connection 1