The Juniper SRX Services Gateway must limit the number of sessions per minute to an organization-defined number for SSH to protect remote access management from unauthorized access.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-66543	JUSX-DM-000163	SV-81033r1_rule		Medium

Description
The rate-limit command limits the number of SSH session attempts allowed per minute which helps limit an attacker's ability to perform DoS attacks. The rate limit should be as restrictive as operationally practical. Juniper Networks recommends a best practice of 4 for the rate limit, however the limit should be as restrictive as operationally practical. User connections that exceed the rate-limit will be closed immediately after the connection is initiated. They will not be in a waiting state.

Description

The rate-limit command limits the number of SSH session attempts allowed per minute which helps limit an attacker's ability to perform DoS attacks. The rate limit should be as restrictive as operationally practical. Juniper Networks recommends a best practice of 4 for the rate limit, however the limit should be as restrictive as operationally practical. User connections that exceed the rate-limit will be closed immediately after the connection is initiated. They will not be in a waiting state.

STIG	Date
Juniper SRX SG NDM Security Technical Implementation Guide	2019-06-28

Details

Check Text ( C-67189r1_chk )
Verify the Juniper SRX sets a connection-limit for the SSH protocol. Show system services ssh If the SSH connection-limit is not set to 4 or an organization-defined value, this is a finding.

Fix Text (F-72619r1_fix)
Configure the SSH protocol with a rate limit. [edit] set system services ssh rate-limit 4 Note: Juniper Networks recommends a best practice of 4 for the rate limit; however, the limit should be as restrictive as operationally practical.