UCF STIG Viewer Logo

Juniper SRX SG ALG Security Technical Implementation Guide


Overview

Date Finding Count (23)
2019-06-28 CAT I (High): 4 CAT II (Med): 19 CAT III (Low): 0
STIG Description
This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil.

Available Profiles



Findings (MAC II - Mission Support Classified)

Finding ID Severity Title
V-66341 High The Juniper SRX Services Gateway Firewall must continuously monitor outbound communications traffic for unusual/unauthorized activities or conditions.
V-66327 High The Juniper SRX Services Gateway Firewall must protect against known types of Denial of Service (DoS) attacks by implementing signature-based screens.
V-66323 High The Juniper SRX Services Gateway Firewall providing content filtering must protect against known and unknown types of Denial of Service (DoS) attacks by implementing statistics-based screens.
V-66339 High The Juniper SRX Services Gateway Firewall must continuously monitor all inbound communications traffic for unusual/unauthorized activities or conditions.
V-66345 Medium The Juniper SRX Services Gateway Firewall must generate an alert that can be forwarded to, at a minimum, the ISSO and ISSM when threats identified by authoritative sources are detected.
V-66347 Medium The Juniper SRX Services Gateway Firewall must generate an alert that can be forwarded to, at a minimum, the ISSO and ISSM when DoS incidents are detected.
V-66343 Medium The Juniper SRX Services Gateway Firewall must generate an alert to, at a minimum, the ISSO and ISSM when unusual/unauthorized activities or conditions are detected during continuous monitoring of communications traffic as it traverses inbound or outbound across internal security boundaries.
V-66303 Medium The Juniper SRX Services Gateway must generate log records when firewall filters, security screens and security policies are invoked and the traffic is denied or restricted.
V-66325 Medium The Juniper SRX Services Gateway Firewall must implement load balancing on the perimeter firewall, at a minimum, to limit the effects of known and unknown types of Denial of Service (DoS) attacks on the network.
V-66307 Medium The Juniper SRX Services Gateway Firewall must be configured to support centralized management and configuration of the audit log.
V-66309 Medium In the event that communications with the Syslog server is lost, the Juniper SRX Services Gateway must continue to queue traffic log records locally.
V-66305 Medium The Juniper SRX Services Gateway Firewall must generate audit records when unsuccessful attempts to access security zones occur.
V-66329 Medium The Juniper SRX Services Gateway Firewall must block outbound traffic containing known and unknown DoS attacks to protect against the use of internal information systems to launch any Denial of Service (DoS) attacks against other networks or endpoints.
V-66321 Medium The Juniper SRX Services Gateway Firewall must terminate all communications sessions associated with user traffic after 15 minutes or less of inactivity.
V-66003 Medium For User Role Firewalls, the Juniper SRX Services Gateway Firewall must employ user attribute-based security policies to enforce approved authorizations for logical access to information and system resources.
V-66313 Medium The Juniper SRX Services Gateway Firewall must not be configured as an NTP server since providing this network service is unrelated to the role as a firewall.
V-66335 Medium The Juniper SRX Services Gateway Firewall must deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
V-66337 Medium The Juniper SRX Services Gateway Firewall must configure ICMP to meet DoD requirements.
V-66331 Medium The Juniper SRX Services Gateway Firewall must only allow inbound communications from organization-defined authorized sources routed to organization-defined authorized destinations.
V-66319 Medium The Juniper SRX Services Gateway Firewall must be configured to prohibit or restrict the use of unauthorized functions, ports, protocols, and/or services, as defined in the PPSM CAL, vulnerability assessments.
V-66317 Medium The Juniper SRX Services Gateway Firewall must not be configured as a DHCP server since providing this network service is unrelated to the role as a Firewall.
V-66315 Medium The Juniper SRX Services Gateway Firewall must not be configured as a DNS proxy since providing this network service is unrelated to the role as a Firewall.
V-66311 Medium The Juniper SRX Services Gateway Firewall must disable or remove unnecessary network services and functions that are not used as part of its role in the architecture.