The Juniper SRX Services Gateway VPN must uniquely identify and authenticate non-organizational users (or processes acting on behalf of non-organizational users).

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-214688	JUSX-VN-000021	SV-214688r385519_rule		Medium

Description
Lack of authentication and identification enables non-organizational users to gain access to the network or possibly a network element that provides opportunity for intruders to compromise resources within the network infrastructure. This requirement only applies to components where this is specific to the function of the device or has the concept of a non-organizational user.

STIG	Date
Juniper SRX Services Gateway VPN Security Technical Implementation Guide	2021-03-25

Details

Check Text ( C-15889r297651_chk )
Verify that groups are not used for authentication. [edit] show security access profile If LDAP is not configured as the first authentication-order, this is a finding.

Fix Text (F-15887r297652_fix)
Configure the LDAP access profile. The LDAP server must use DoD PKI for authentication of users. [edit] set access profile authentication-order ldap set access profile address-assignment pool dyn-vpn-pool set access profile ldap-options base-distinguished-name CN=Users, DC=firewall, DC=com (Location from where LDAP will start searching for users) set access profile ldap-options search search-filter sAMAccountName= set access profile ldap-options search admin-search distinguished-name CN=Administrator, CN=Users, DC=firewall, DC=com (User who is authorized to search the ldap tree) set access profile ldap-options search admin-search password set access profile ldap-server port 389/636 set access firewall-authentication pass-through default-profile set access firewall-authentication web-authentication default-profile Note: To find the user or administrator base DN, use any LDAP browser. On an Internet search engine, search for ldp.exe, which is a very basic LDAP browser. When using LDAP groups to authenticate a user, or a user belonging to a group in the active directory, include the following statement: set access profile session-options client-group Note: Without the above statement, users are not searched based on the group name or group string. The IP address pool configuration is as follows (the user will be assigned the IP from this pool): set access address-assignment pool dyn-vpn-pool family inet network (e.g.. 192.168.100.0/24) set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range low (e.g.. 192.168.100.1) set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range high (e.g.. 192.168.100.100) Note: The IP network used for dynamic VPN users should be different from the IP network of the external interface used in the IKE configuration. The access profile is linked to the xauth of the gateway for dynamic VPN. set security ike gateway xauth access-profile Under security >> dynamic-vpn, add all the users that are going to use the dynamic VPN. The command is as follows: set security dynamic-vpn clients all user Note: Users who are going to use dynamic VPN. This will be the AD user logon name for each user.

Fix Text (F-15887r297652_fix)

Configure the LDAP access profile. The LDAP server must use DoD PKI for authentication of users.

[edit]
set access profile authentication-order ldap
set access profile address-assignment pool dyn-vpn-pool
set access profile ldap-options base-distinguished-name CN=Users, DC=firewall, DC=com (Location from where LDAP will start searching for users)

set access profile ldap-options search search-filter sAMAccountName=
set access profile ldap-options search admin-search distinguished-name CN=Administrator, CN=Users, DC=firewall, DC=com (User who is authorized to search the ldap tree)
set access profile ldap-options search admin-search password
set access profile ldap-server port 389/636
set access firewall-authentication pass-through default-profile
set access firewall-authentication web-authentication default-profile

Note: To find the user or administrator base DN, use any LDAP browser. On an Internet search engine, search for ldp.exe, which is a very basic LDAP browser.

When using LDAP groups to authenticate a user, or a user belonging to a group in the active directory, include the following statement:

set access profile session-options client-group

Note: Without the above statement, users are not searched based on the group name or group string.

The IP address pool configuration is as follows (the user will be assigned the IP from this pool):

set access address-assignment pool dyn-vpn-pool family inet network (e.g.. 192.168.100.0/24)
set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range low (e.g.. 192.168.100.1)
set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range high (e.g.. 192.168.100.100)

Note: The IP network used for dynamic VPN users should be different from the IP network of the external interface used in the IKE configuration.

The access profile is linked to the xauth of the gateway for dynamic VPN.

set security ike gateway xauth access-profile

Under security >> dynamic-vpn, add all the users that are going to use the dynamic VPN. The command is as follows:

set security dynamic-vpn clients all user

Note: Users who are going to use dynamic VPN. This will be the AD user logon name for each user.