The Juniper router must be configured to have all inactive interfaces disabled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-217016	JUNI-RT-000060	SV-217016r639663_rule		Low

Description
An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. Unauthorized personnel with access to the communication facility could gain access to a router by connecting to a configured interface that is not in use. If an interface is no longer used, the configuration must be deleted and the interface disabled. For sub-interfaces, delete sub-interfaces that are on inactive interfaces and delete sub-interfaces that are themselves inactive. If the sub-interface is no longer necessary for authorized communications, it must be deleted.

Description

An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. Unauthorized personnel with access to the communication facility could gain access to a router by connecting to a configured interface that is not in use. If an interface is no longer used, the configuration must be deleted and the interface disabled. For sub-interfaces, delete sub-interfaces that are on inactive interfaces and delete sub-interfaces that are themselves inactive. If the sub-interface is no longer necessary for authorized communications, it must be deleted.

STIG	Date
Juniper Router RTR Security Technical Implementation Guide	2021-02-11

Details

Check Text ( C-18245r296916_chk )
Review the router configuration and verify that inactive interfaces have been disabled as shown below. interfaces { ge-1/1/0 { disable; unit 0 { } } If an interface is not being used but is configured or enabled, this is a finding.

Fix Text (F-18243r296917_fix)
Disable all inactive interfaces as shown below. [edit interfaces] set ge-1/1/0 disable